變曲率彎道超臨界流水面超高及壓強特性研究

STUDY ON THE SUPERELEVATION AND PRESSURE OF SUPERCRITICAL FLOW IN VARIABLE CURVATURE BEND

10.6652/JoCICHE.201712_29(4).0004

丁燦(Can Ding)；王韋(Wei Wang)；田忠(Zhong Tian)；張春妮(Chun Ni Zhang)

變曲率彎道 ； 超臨界流 ； 水面超高 ； 數值模擬 ； variable curvature bend ； supercritical flow ； water surface superelevation ； numerical simulation

中國土木水利工程學刊

29卷4期（2017 / 12 / 01）

249 - 256

繁體中文

針對超臨界流條件下彎道水流水面超高大、壓強分佈不均等問題，本文提出了變曲率彎道，通過與定曲率彎道的對比試驗，對彎道段流態、水深、水面超高及時均壓強進行了系統研究，並在相應條件下利用fluent軟體對變曲率彎道進行了數值模擬。結果表明：變曲率彎道水流流態更平穩，邊牆對水流的約束作用明顯減小，更少出現凸岸河床露底現象，彎道中最大水面超高較定曲率彎道最多減小15.1%。時均壓強分佈也更均勻，各工況下變曲率彎道底板相對時均壓強變幅較定曲率彎道最多減小達46.43%；數值模擬結果顯示凹凸兩岸水深的計算值與實測值能較好吻合，水流於彎道出口附近發生轉向。研究結果表明，變曲率彎道在超臨界流控制中明顯優於定曲率彎道。

Variable curvature bend is proposed in this paper for the problem of high superelevation and uneven pressure .Characteristics of fixed and variable bends were analyzed including flow pattern, water depth, water surface superelevation and pressure distribution, and a numerical simulation for variable curvature bend is conducted by fluent. The result indicates that: Compared with fixed curvature bend, the flow pattern is more stable, the maximum superelevation in whole bend significantly reduced a maximum of 15.1%, the possibility of bottom exposure at convex bank side and constrain of wall is much reduced, the variation amplitude of pressure in the bottom decreases a maximum of 46.43% in the variable curvature bend. The numerical result of variable curvature bend agrees well with experimental data for water depth, and flow direction changes in the vicinity of the bend outlet .The variable curvature bend is superior to the fixed curvature bend in the control of supercritical bend flow.

1. Chow, V. T.(1959).Open-Channel Hydraulics.New York:McGraw-Hill Book Company.
2. Del Giudice, Giuseppe,Gisonni, Corrado,Hager, Willi H.(2000).Supercritical flow in bend manhole.Journal of Hydraulic Engineering, ASCE,126(1),48-56.
3. Ellis, J.(1985).Numerical analysis of Kielder dam spillway.Journal of the Institution of Water Engineers and Scientists,39(3),254-270.
4. Gholami, Azadeh,Akhtari, Ali Akbar,Minatour, Yasser(2014).Experimental and numerical study on velocity fields and water surface profile in a strongly-curved 90° open channel bend.Engineering Applications of Computational Fluid Mechanics,8(3),447-461.
5. Haitham, K.,Ghamry, Peter M.(2005).Two-dimensional depth-averaged modeling of flow in curved open channels.Journal of Hydraulic Research,43(1),44-55.
6. Hirt, C. W.,Nichols, B. D.(1981).Volume of fluid (VOF) method for the dynamics of free boundaries.Journal of Computational Physics,39,201-225.
7. Issa, R. I.(1985).Solution of the implicitly discretised fluid flow equations by operator-splitting.Journal of Computational Physics,62,40-65.
8. Knapp, R. T.(1951).Design of channel curves for supercritical flow.Trans, ASCE,116,296-325.
9. Langbein, Walter B.,Leopold, Luna B.(1966).River meanders-Theory of minimum variance.U.S. Geological Survey Prof. Paper,422(H),1-15.
10. LaRocque, Lindsey Ann,Imran, Jasim,Chaudhry, M. Hanif(2013).Experimental and numerical investigations of two-dimensional dam-break flows.Journal of Hydraulic Engineering, ASCE,139(6),569-579.
11. Lien, H. C.,Hsieh, T. Y.,Yang, J. C.,Yeh, K. C.(1999).Bend-flow simulation using 2d depth-averaged model.Journal of Hydraulic Engineering, ASCE,125(10),1097-1108.
12. Poggi, B.(1956).Supercritical flows in channel bends.L’Energia Elettrica,33,465-480.
13. Reinauer, R.,Hager, W. H.(1997).Supercritical bend flow.Journal of Hydraulic Engineering, ASCE,123(3),208-218.
14. Steffler, Peter M.,Rajaratnam, Nallamuthu,Peterson, A.W.(1985).Water surface at change of channel curvature.Journal of Hydraulic Engineering, ASCE,111(5),866-870.
15. van Balen, W.,Blanckaert, K.,Uijttewaal, W. S. J.(2010).Analysis of the role of turbulence in curved openchannel flow at different water depths by means of experiments, LES and RANS.Journal of Turbulence,11(12),1-34.
16. Yakhot, Victor,Orszag, Steven A.(1986).Renormalization-group analysis of turbulence.Physical Review Letters,57(14),1722-1724.
17. Zeng, Jie,Constantinescu, George,Blanckaert, Koen(2008).Flow and bathymetry in sharp open-channel bends: Experiments and predictions.Water Resource Research,44,W09401.
18. 王韋,許唯臨(1999)。最大或然彎道在泥石流排導溝上的應用。四川聯合大學學報（工程科學版），1999(3)，73-77。
19. 王福軍(2004).計算流體動力學分析.北京:清華大學出版社.
20. 吳宇峰,伍超,李靜(2006)。較小半徑溢洪彎道急流超高的研究。四川大學學報（工程科學版），2006(6)，38-42。
21. 吳華莉,陳翠霞,金中武(2013)。基於Fluent 的連續彎道水流三維數值模擬。武漢大學學報（工學版），2013(5)，599-603。
22. 張紅武,呂盺(1993).彎道水力學.北京:水利電力出版社.
23. 黃細彬(1994)。急流衝擊波的計算及分析。河海大學學報，1994(3)，96-100。
24. 萬俊(2006)。四川大學水利水電學院。
25. 劉煥芳(1990)。彎道自由水面形狀的研究。水利學報，1990(4)，46-50。