题名

應用影像量測技術於致動器位移回饋控制之研究

并列篇名

DISPLACEMENT FEEDBACK CONTROL OF SERVO-HYDRAULIC ACTUATORS USING IMAGE-BASED ANALYSIS TECHNOLOGY

DOI

10.6652/JoCICHE.202012_32(8).0006

作者

鄭宇辰(Yu-Chen Cheng);陳沛清(Pei-Ching Chen);楊元森(Yuan-Sen Yang)

关键词

影像量測 ; 位移回饋控制 ; 油壓致動器 ; 反覆載重實驗 ; 動態實驗 ; image-based measurement ; displacement feedback control ; servo-hydraulic actuator ; quasi-static cyclic loading test ; dynamic loading test

期刊名称

中國土木水利工程學刊

卷期/出版年月

32卷8期(2020 / 12 / 01)

页次

721 - 732

内容语文

繁體中文

中文摘要

在傳統的結構反覆載重實驗中,若油壓致動器需要夾治具轉接後方與試體連接時,常使用外部位移計做為致動器位移控制的回饋訊號,以確保試體達到預期的變形。在實驗進行的過程中,若位移計與試體的連接脫落,無法將正確的位移訊號傳回控制器,恐造成致動器失控而導致實驗失敗。此外,對於高度較高或夾治具架設較複雜的實驗試體,不容易準確且安全地架設外部位移計。有鑑於此,本研究應用影像量測技術,透過即時運算機器分析試體的位移反應,並將其回饋至致動器控制器進行位移控制。實驗時將目標物標定於試體上,藉由高速相機拍攝並即時計算目標物的位移量,透過光纖共享記憶體以數位訊號的形式直接與控制器進行數據的交換,以達到致動器的即時位移回饋控制。實驗驗證結果顯示,本研究所開發的技術,可成功完成靜態反覆載重實驗以及動態位移加載實驗。未來在結構實驗應用方面,不僅不受安裝外部位移計所需的工作空間限制,亦可降低外部位移計鬆脫導致的實驗風險。

英文摘要

Cyclic loading tests have been considered as the most effective approach to investigate force-to-displacement behavior of a structural specimen. In particular, an external displacement transducer is essential to measuring specimen deformation as displacement feedback for controlling the servo-hydraulic actuator on condition that fixtures are used to connect the actuator to the specimen. However, if the connection between the displacement transducer and specimen is loosen, incorrect feedback displacement could result in uncontrollable actuator response and fail the structural testing. In this study, image-based analysis technology has been applied to displacement feedback control of servo-hydraulic actuators for structural testing. A high-speed camera is used to capture images of the specimen which are sent to a real-time computational platform to calculate the specimen displacement in real time. The calculated displacement is transmitted to the digital controller of actuator through the Shared Common Random Access Memory Network, forming a closed-loop control system. Experimental results demonstrate that the proposed framework is applied to quasi-static cyclic loading tests and dynamic-loading tests successfully and stably with exceptional control performance.

主题分类 工程學 > 土木與建築工程
工程學 > 水利工程
工程學 > 市政與環境工程
参考文献
  1. Diwate, Rahul B.,Alaspurkar, Satish J.(2013).Study of different algorithms for pattern matching.International Journal of Advanced Research in Computer Science and Software Engineering,2-7.
  2. Domingo, Andreas,Akmeliawati, Rini,Chow, Kuang Ye(2007).Pattern matching for automatic sign language translation system using LabVIEW.International Conference on Intelligent and Advanced Systems
  3. Giachetti, A(2000).Matching techniques to compute image motion.Journal of Image and Vision Computing,18,247-260.
  4. Khalid, AA,Sture, S(1999).Sand shear band thickness measurement by digital imaging techniques.Journal of Computing in Civil Engineering (ASCE),13(2),103-109.
  5. Lewangamage, Chamindalal Sujeewa,Abe, Masato,Fujino, Yozo,Yoshida, Junji(2004).Strain field measurements of rubber by image analysis and design criteria for laminated rubber bearings (LRB).Earthquake Engng Struct. Dyn.,33,445-464.
  6. Murat, G,Tuncer, BE,Peter, JB(1999).Measurement of particle movement in granular soils using image analysis.Journal of Computing in Civil Engineering (ASCE),13(2),116-122.
  7. Nandi, Asoke K.,Sujatha, N.,Menaka, R.,Alex, John Sahaya Rani(2018).Computational signal processing and analysis
  8. Pan, Bing,Yu, Liping,Wu, Dafang(2013).High-Accuracy 2D digital image correlation measurements with bilateral telecentric lenses: Error analysis and experimental verification.Experimental Mechanics,53,1719-1733.
  9. Posada-Gómez, Rubén,Sandoval-González, Oscar Osvaldo,Sibaja, Albino Martínez,Portillo-Rodríguez, Otniel,Alor-Hernández, Giner(2011).Digital image processing using LabVIEW.Instituto Tecnológico de Orizaba, Departamento de Postgrado e Investigación
  10. Shuprajhaa,Subasree,Vaitheeshwar,Sivakumar(2016).A review on image processing techniques using pattern matching in LabVIEW.International Journal of Advanced Engineering Research and Applications,1(11),441-445.
  11. Wu, Chiun-lin,Kuo, Wu-Wei,Yang, Yuan-Sen,Hwang, Shyh-Jiann,Elwood, Kenneth J.,Loh, Chin-Hsiung,Moehle, Jack P.(2009).Collapse of a nonductile concrete frame: Shaking table tests.Earthquake Engng Struct. Dyn.,38,205-224.
  12. Yang, Yuan-Sen(2019).Measurement of dynamic responses from large scale shake table tests by analyzing non-synchronized videos.Sensors,19(16),1-28.
  13. Yang, Yuan-Sen,Huang, Chang-Wei,Wu, Chiun-lin(2012).A Simple Image‐Based Strain Measurement Method for Measuring The Strain Fields in an RC‐Wall Experiment.Earthquake Engng Struct. Dyn.,41,1-17.
  14. Yang, Yuan-Sen,Wu, Chiun-lin,Loh, Chin-Hsiung,Yang, Chung-Ming,Tu, Wen-Hsiang,Shih, Ming-Hsiang,Tung, Shih-Heng,Caperan, Philippe(2008).,未出版
  15. 白楚平(2017)。國立臺灣海洋大學機械與機電工程學系。
  16. 石康,葉宏,胡安燦,周雷,孫宇(2014)。一種基於 LabVIEW 的機器視覺標定和校正方法。激光與光電子學進展,51(10),101501。
  17. 林偉超(2012)。國立勤益科技大學機械工程系。
  18. 林敏郎,陳沛清,蔡克銓,吳穎涵(2008)。國家地震工程研究中心技術報告國家地震工程研究中心技術報告,國家地震工程研究中心。
  19. 莊權德(2007)。南台科技大學電機工程研究所。
  20. 盧明智,張沛鈞,蔡政沛(2010)。盧明智、張沛鈞、蔡政沛,「影像辨識即時物體追蹤系統」,LABVIEW 論壇 (2010)。
  21. 魏逢城(2008)。國立交通大學機械工程研究所。