以CBR試驗探討3D列印地工格網於軟弱土壤之加勁效果

EXPLORING THE MECHANICAL BENEFITS OF 3D PRINTING GEOGRID-REINFORCED SOFT SUBGRADE THROUGH CBR TESTS

10.6652/JoCICHE.202110_33(6).0004

簡志峻(Chih-Chun Chien)；黃文昭(Wen-Chao Huang)

加州貫入比試驗 ； 軟弱土壤 ； 地工格網加勁 ； 3D列印 ； 三角形地工格網 ； California Bearing Ratio (CBR) test ； soft subgrade ； geogrid reinforcement ； 3D-printing ； triangular geogrid

中國土木水利工程學刊

33卷6期（2021 / 10 / 01）

439 - 450

繁體中文

地工格網應用於無鋪面道路之加勁效果，已有許多學者利用物理試驗及現地實驗等不同方式進行加州貫入比（CBR）之評估，但其的產製方式與幾何性質對於加勁效果的相關研究，仍屬少數。本研究以CBR試驗進行分析，並以高嶺土作為軟弱路基黏土層的材料，基底層材料為單一尺寸的人造三角柱研磨石，由不同變數包含基底層厚度、地工格網開口幾何形狀、產製方式（市售PET材料與3D列印材料）等條件下探討加勁機制與效益。研究結果顯示，地工格網於軟弱黏土之加勁效果顯而易見，並以三角形孔徑地工格網加勁效果較佳。此外，CBR試驗結果亦顯示，運用3D列印之地工格網具有與市售加勁格網之類似效果，因此可在後續研究中客製化不同類型地工格網，進一步分析具有最佳加勁效果之地工格網型式。

In this study, a geogrid-reinforced soft subgrade system's benefits are studied through a series of CBR tests. In this study, kaolinite was prepared as the weak subgrade clayey material. One-size artificial triangular prism grinding stone was employed as the aggregate base layer material. The reinforcing benefits were discussed with different scenarios, including the aggregate base layer thickness, the geogrid aperture shape, and the production method (commercial product made of PET and 3D-printed materials). The analysis results showed that the geogrid reinforcement could enhance the soft subgrade's mechanical performances, especially for triangular aperture geogrid. Finally, the research results also show that 3D-printed geogrid also exhibits a similar enhancing effect as the PET geogrid; therefore, different geometric types of geogrids may be customized in subsequent studies to explore the reinforcement effect with various test configurations.

1. (2015).ASTM-6637-15, Standard Test Method for Determining Tensile Properties of Geogrids by the Single or Multi-Rib Tensile Method.West Conshohocken, PA, U.S.A.:ASTM International.
2. (2016).ASTM-D2166/ D2166M-16, Standard Test Method for Unconfined Compressive Strength of Cohesive Soil.West Conshohocken, Pennsylvania, U.S.A:ASTM International.
3. (2016).ASTM-1883-16, Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils.West Conshohocken, PA, U.S.A.:ASTM International.
4. Aboelwafa, M. M.,Roodi, G. H.,Zornberg, J. G.(2019).Inisolation Properties of Biaxial and Triangular Geogridsalong Various Directions.Industrial Fabrics Association International Geosynthetics Conference,Houston, TX, U.S.A.:
5. Al-Qadi, I. L.,Hughes, J. J.(2000).Field evaluation of geocell use in flexible pavement.Transportation Research Record,1313,26-35.
6. Ashmawy, A. K.,Bourdeau, P. L.(1995).Geosynthetic-reinforced soils under repeated loading: A review and comparative design study.Geosynthetics International,2(4),643-678.
7. Barber, V. C.,Odom, E. C.,Patrick, R. W.(1978).,Vicksburg, Mississippi, U.S.A.:U.S. Army Engineer Waterways Experiment Station.
8. Barksdale, R. D.,Brown, S. F.,Chan, F.(1989).Highway Research Progress ReportHighway Research Progress Report,Washington DC, U.S.A.:National Cooperative.
9. Bourdeau, P. L.(1989).Modelling of membrane action in a two-layer reinforced soil.Computers and Geotechnics,7(1-2),19-36.
10. Das, B. M.,Shin, E. C.(1994).Strip foundation on geogridreinforced clay: Behavior under cyclic loading.Geotextiles and Geomembranes,13(10),657-666.
11. Department of the Army, Use of Geogrids in Pavement Construction, U.S. Army Corps of Engineers(2003).Department of the Army, Use of Geogrids in Pavement Construction, U.S. Army Corps of Engineers, Technical Letter No. 1110-1-189, U.S.A. (2003)..
12. Geosynthetic Materials Association(2000).GMA White PaperGMA White Paper,U.S.A.:United States Department of Transportation.
13. Giroud, J. P.,Ah-Line, C.,Bonaparte, R.(1985).Design of Unpaved Roads and Trafficked Areas with Geogrids, Polymer Grid Reinforcement.Thomas Telford Limited,116-127.
14. Giroud, J. P.,Han, J.(2004).Design method for geogrid-reinforced unpaved roads. I. Development of design method.Journal of Geotechnical and Geoenvironmental Engineering,130(8),775-786.
15. Giroud, J. P.,Han, J.(2004).Design method for geogrid-reinforced unpaved roads. II. Calibration and Applications.Journal of Geotechnical and Geoenvironmental Engineering,130(8),787-797.
16. Giroud, J. P.,Noiray, L.(1981).Geotextile-reinforced unpaved road design.Geotechnical Engineering,107,1233-1254.
17. Huang, Wen-Chao(2007).West Lafayette, Indiana,Purdue University.
18. Kumar, Senthil,Ramasamy, Rajkumar(2012).Effect of geotextile on CBR strength of unpaved road with soft subgrade.Electronic Journal of Geotechnical Engineering,17,1355-1363.
19. Miura, N.,Sakai, A.,Taesiri, Y.,Yamanouchi, T.,Yasuhara, K.(1990).Polymer grid reinforced pavement on soft clay grounds.Geotextile and Geomembranes,9,99-123.
20. Nimmesgern, M.,Bush, D.(1991).The effect of repeated traffic loading on geosynthetic reinforcement anchorage resistance.Proceedding of the Conference on Geosynthetics,Atlanta, Georgia, U.S.A.:
21. Patra, Souvik,Bera, Ashis Kumar(2017).California bearing ratio of fine grained soil and its correlation.International Journal of Earth Sciences and Engineering,10(3),666-672.
22. Perkins, S. W.(1999).,Helena, MT:Montana Dept. of Transportation.
23. Perkins, S. W.,Ismeik, M.(1997).A synthesis and evaluation of geosynthetic-reinforced base layers in flexible pavements- Part II.Geosynthetics International,4(6),605-621.
24. The Tensar Corporation(2003).,United Kingdom:Tensar information limited.
25. The Tensar Corporation(1996).Design Guideline for Flexible Pavement with Tensar Geogrid Reinforced Base Courses.United Kingdom:
26. The Tensar Corporation(2014).Radial stiffness and its performance relationship.Tensar Information Bulletin,1-4.
27. The Tensar Corporation(1998).A Review of Geosynthetic Functions and Applications in Paved and Unpaved Roads.United Kingdom:
28. The Tensar Corporation(2014).Understanding radial stiffness.Tensar Information Bulletin,1-2.
29. Webster, S. L.(1993).Waterways ExperimentWaterways Experiment,Vicksburg, Mississippi, U.S.A:.
30. Zheng, L.,Roodi, G. H.,Zornberg, J. G.(2019).Case history of a geosynthetic-stabilized base roadway founded over expansive clay subgrade.Geotechnical Materials, Modeling, and Testing, ASCE Geo-Congress 2019,Philadelphia, Pennsylvania, U.S.A.:
31. Zornberg, J. G.(2017).Functions and applications of geosynthetics in roadways: Part 1.Procedia Engineering,U.S.A.:
32. 林士誠(2017)。標準貫入試驗 N 值應用之彙整（一）。台灣省土木技師公會技師報
33. 段瀚瀛,陳柏瑋,陳祐旻,吳睿恆(2016)。地工格網於無鋪面道路加勁設計之回顧與展望。工程永續與土木防災研討會論文集，高雄:
34. 黃文昭(2012)。地工格網於無鋪面道路加勁設計之回顧與展望。地工技術，134，47-58。