結合BIM與橋梁管理系統之研究

A STUDY ON INTEGRATING BIM AND BRIDGE MANAGEMENT SYSTEM

10.6652/JoCICHE.202111_33(7).0008

姚乃嘉(Nie-Jia Yau)；莊友涵(Yu-Han Chuang)；黃子綸(Tzu-Lun Huang)

建築資訊模型（BIM） ； 橋梁管理系統 ； 橋梁維護管理 ； Building Information Modeling ； Bridge Management System ； Bridge Maintenance Work

中國土木水利工程學刊

33卷7期（2021 / 11 / 01）

545 - 553

繁體中文

建築資訊模型（Building Information Modeling, BIM）是以建築物構件為基礎所發展的技術，目前國內BIM在建築工程已有相當程度的發展，但在橋梁、道路等土木工程方面，對於BIM之應用則僅處於起步階段。第二代臺灣地區橋梁管理資訊系統（The 2nd Generation of Taiwan Bridge Management System, TBMS2），已可利用橋梁現有之基本資料，自動化建立橋梁之各種主要構件並組成三維（3D）橋梁示意模型。但TBMS2目前並無法直接讀取橋梁BIM模型中之橋梁資訊，亦即，橋梁的BIM模型目前尚無法與TBM2結合，導致即便已建立橋梁的BIM模型，仍須於TBMS2中以人工方式逐一輸入橋梁之基本資料，其中實有極大之改善空間。本研究旨在研析結合橋梁BIM模型與TBMS2有效可行之方法。本研究首先分析TBMS2中橋梁基本資料之必填欄位，進而探討建立橋梁BIM模型之標準作業模式，建立符合TBMS2所需之建模規則，使建模人員建置橋梁模型時，可同時建置可供TBMS2使用之維護管理資訊，即可輸出橋梁資訊檔案供讀取而輸入TBMS2中，並由TBMS2中自動化生成之三維橋梁示意模型加以驗證。本研究之成果可有效減少使用者輸入橋梁資料的時間，並提高TBMS2中橋梁資料的正確性。

Building Information Modeling (BIM) is a 3D application technique based on building components that has been used in the building industry in Taiwan for a number of years. However, only a few bridge BIM applications found as opposed to that in building projects in Taiwan. The 2nd generation of Taiwan Bridge Management System (TBMS2) is able to generate a schematic 3D model based on basic bridge inventory data. Currently, TBMS2 is not able to read data in bridge BIM models generated by BIM software. I.e., the integration between bridge BIM and TBMS2 is not yet feasible. Even though the bridge BIM model has been established, the bridge information still needs to be input into TBMS2 manually. There is a lot room for improvement. This research aims at developing an efficient and feasible means to integrate bridge BIM models and TBMS2. Necessary basic fields for a bridge was firstly analyzed, then the standard processes to establish a bridge BIM model in the software were summarized. Thus, after the bridge BIM model is established, a bridge data file can be output as the input into TBMS2 which saves a huge amount of human labor. Verification of data correctness also can be performed by comparing the bridge shown in BIM and the schematic bridge model shown in TBMS2. Results of this research demonstrate that BIM techniques are very helpful in improving efficiency and data correctness when using TBMS2 for bridge management.

1. Al-Shalabi, Firas A.,Turkan, Y.,Laflamme, S.(2015).BrIM Implementation for Documentation of Bridge Condition for Inspection.International Construction Specialty Conference of the Canadian Society for Civil Engineering (ICSC) (5th : 2015)
2. Arun, M.,Shirolé, P. E.(2008).FHWA ProjectFHWA Project,未出版
3. Heikkilä, R.,Hovila, J.(2012).National Guidelines for Bridge Information Modeling and Automation.
4. National Institute of Building Science(2017).National BIM Guide For Owmer.
5. Teemu Kivimäki, R. H.(2010).Bridge information modelling (BrIM) and model utilization at worksites in Finland.2010 Proceedings of the 27th ISARC,Bratislava, Slovakia:
6. Thompson, P. D.,Small, E. P.,Johnson, M.,Marshall, A. R.(1998).The Pontis Bridge Management System.Structural Engineering International,8(4)
7. Xu, Y.,Turkan, Y.(2019).Bridge Inspection Using Bridge Information Modeling (BrIM) and Unmanned Aerial System (UAS), Bridge Inspection Using Bridge Information Modeling (BrIM) and Unmanned Aerial System (UAS).Proceedings of the 35th CIB W78 2018 Conference: IT in Design, Construction, and Management
8. 王亭惟,蔣啟恆,黃炳勳(2016)。淺談橋梁工程設計階段之 BIM 模型建置與應用。技師期刊，73，63-69。
9. 許皓威,簡維廷,周敬淳,柳儒錚,謝尚賢(2017)。應用BIM 於橋梁施工之初步探討。營建知訊，417，65-71。