题名

UHPC材料性質與工程應用

并列篇名

MATERIAL PROPERTIES AND STRUCTURAL APPLICATIONS OF UHPC

DOI

10.6652/JoCICHE.202203_34(1).0009

作者

顏誠皜(Cheng-Hao Yen)；韋瀞雅(Jing-Ya Wei)；溫國威(Kuo-Wei Wen)；洪崇展(Chung-Chan Hung)

关键词

超高性能混凝土 ； 工程應用 ； 耐久性 ； 力學性質 ； UHPC ； application ； durability ； mechanical properties

期刊名称

中國土木水利工程學刊

卷期/出版年月

34卷1期（2022 / 03 / 01）

页次

89 - 97

内容语文

繁體中文
中文摘要

超高性能混凝土（Ultra High Performance Concrete，簡稱UHPC）具備優於傳統混凝土數倍以上的力學性能，同時憑藉著緻密的基體與抗裂能力，大幅提升耐久性，使得有害氣液體不會侵蝕混凝土內部，提升構造物之服務壽命。除此之外，UHPC可以結合創新的補強工法，例如噴漿技術、斜撐、間柱、剪力牆與預鑄版等，有效提升非韌性構架之耐震能力。將UHPC於耐震構件上，可減少圍束與剪力鋼筋使用量，因此可簡化施工技術，並大幅提升構件之韌性與抗剪能力。本文整理了UHPC的材料力學、耐久性與結構力學行為，並介紹UHPC於國外建築與結構工程應用的案例。
英文摘要

Ultra-High Performance Concrete (UHPC) has mechanical properties that are several times better than traditional concrete. At the same time, the dense packing density and crack resistance substantially enhance its durability. Consequently, harmful gas and liquid are not able to invade the interior of the concrete, thus increasing the service life of UHPC structural members. In addition, UHPC can be combined with innovative retrofitted methods, such as shotcrete technology, bracing, infilled columns, shear walls, and prefabricated jackets, to improve the seismic capacity of non-ductile structures. The use of UHPC in a structural member can reduce transverse reinforcement and cross-section, thus simplifying the construction. This paper briefly summarizes the mechanical behavior, durability properties of UHPC and introduces the applications of UHPC in structural engineering.
主题分类 工程學 > 土木與建築工程
工程學 > 水利工程
工程學 > 市政與環境工程
参考文献
  1. 洪崇展,郭家維,黃丞毅(2020)。超高性能纖維混凝土於非韌性柱包覆補強工法之有效性。中國土木水利工程學刊，32，693-699。
    連結：
  2. 洪崇展,戴艾珍,顏誠皜,溫國威,張庭維(2017)。新世代多功能性混凝土材料⎯高性能纖維混凝土。土木水利，44，33-51。
    連結：
  3. 袁宇秉,洪崇展,Li, Victor C(2020)。應用高韌性纖維混凝土（ECC）邁向永續基礎設施工程。中國土木水利工程學刊，32，713-720。
    連結：
  4. Acker, P.,Behloul, M.(2004).Ductal® technology: A large spectrum of properties, a wide range of applications.Proc of the Int Symp on UHPC,Kassel, Germany:
  5. AFGC(2002).AFGC. Interim recommendations, Ultra High Performance Fibre-Reinforced Concretes, AFGC, Paris (2002)..
  6. Ahmad, J.,Zaid, O.,Pérez, CL.-C.,Martínez-García, R.,López-Gayarre, F.(2022).Experimental research on mechanical and permeability properties of nylon fiber reinforced recycled aggregate concrete with mineral admixture.applied sciences,12,554.
  7. Atmajayanti, A. T.,Hung, C.-C.,Yuen, T. Y.,Shih, R.-C.(2021).Influences of sodium lignosulfonate and highvolume fly ash on setting time and hardened state properties of engineered cementitious composites.Materials,14,4779.
  8. Aubry, S.,Bompas, P.,Vaudeville, B.,Corvez, D.,Lagrange, T.,Mazzacane, P.,Brizou, A.(2013).A UHPFRC cladding challenge: the fondation Louis Vuitton pour la création ‘Iceberg’.2nd RILEM-fib-AFGC International Symposium on Ultra-High Performance Fibre-Reinforced Concrete
  9. Bermudez, M.,Hung, C.(2021).Shear behavior of steel reinforced ultra high performance concrete members with hybrid fibers.EASEC16
  10. Carbonell Muñoz, M. A.,Harris, D. K.,Ahlborn, T. M.,Froster, D. C.(2014).Bond performance between ultrahigh-performance concrete and normal-strength concrete.Journal of Materials in Civil Engineering,26,04014031.
  11. Chan, Y.-W.,Chu, S.-H.(2004).Effect of silica fume on steel fiber bond characteristics in reactive powder concrete.Cement and Concrete Research,34,1167-1172.
  12. Chao, S.,Shamshiri, M.,Liu, X.,Palacios, G.,Schultz, A.,Nojavan, A.(2021).Seismically robust ultra-highperformance fiber-reinforced concrete columns.ACI Structural Journal,118,17-32.
  13. Chao, S.-H.,Kaka, V.,Shamshiri, M.,Toward, A.(2019).Non-prestressed precast long-span bridge girder using UHP-FRC.International Interactive Symposium on Ultra-High Performance Concrete
  14. Chen, J.,Horgnies, M.(2012).Self-cleaning ultra-high performance concrete surfaces.Proceedings of 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials,Germany:
  15. Cwirzen, A.,Penttala, V.(2006).Effect of increased aggregate size on the mechanical and rheological properties of RPC.Proceedings of Second International Symposium on Advances in Concrete through Science and Engineering,Quebec, Canada:
  16. Dong, Y.(2018).Performance assessment and design of ultrahigh performance concrete (UHPC) structures incorporating life-cycle cost and environmental impacts.Construction and Building Materials,167,414-425.
  17. Du, J.,Meng, W.,Khayat, K. H.,Bao, Y.,Guo, P.,Lyu, Z.,Abu-obeidah, A.,Nassif, H.,Wang, H.(2021).New development of ultra-high-performance concrete (UHPC).Composites Part B: Engineering,109220.
  18. Dutalloir, F.,Thibaux, T.,Cadoret, G.,Birelli, G.(1998).BSI: a new, very high performance concrete, Initial industrial application, The French Technology of Concrete.13th FIP congress,Amsterdam:
  19. Fehling, E.,Ismail, M.(2012).Experimental investigation on UHPC structural elements subject to pure torsion.Proceeding: Third International Symposium on Ultra High Performance Concrete
  20. Garas, V. Y.,Kahn, L. F.,Kurtis, K. E.(2009).Short-term tensile creep and shrinkage of ultra-high performance concrete.Cement and Concrete Composites,31,147-152.
  21. Graybeal, B.(2014).,United States. Federal Highway Administration.
  22. Graybeal, B.,Brühwiler, E.,Kim, B.-S.,Toutlemonde, F.,Voo, Y. L.,Zaghi, A.(2020).International perspective on UHPC in bridge engineering.Journal of Bridge Engineering,25,04020094.
  23. Hiremath, P.,Yaragal, S. C.(2017).Investigation on mechanical properties of reactive powder concrete under different curing regimes.Materials Today: Proceedings,4,9758-9762.
  24. Hooton, R.,Titherington, M.(2004).Chloride resistance of high-performance concretes subjected to accelerated curing.Cement and Concrete Research,34,1561-1567.
  25. Hung, C.,Wen, K.(2020).Investigation of shear strength of ultra-high performance concrete beams without stirrup.Proc, 17th World Conf on Earthquake Engineering, 17WCEE,Tokyo:
  26. Hung, C.-C.(2010).University of michigan.
  27. Hung, C.-C.,Chen, Y.-S.(2016).Innovative ECC jacketing for retrofitting shear-deficient RC members.Construction and Building Materials,111,408-418.
  28. Hung, C.-C.,Chen, Y.-T.,Yen, C.-H.(2020).Workability, fiber distribution, and mechanical properties of UHPC with hooked end steel macro-fibers.Construction and Building Materials,260,119944.
  29. Hung, C.-C.,Chueh, C.-Y.(2016).Cyclic behavior of UHPFRC flexural members reinforced with high-strength steel rebar.Engineering Structures,122,108-120.
  30. Hung, C.-C.,El-Tawil, S.(2010).Seismic behavior of a coupled-wall system with HPFRCC coupling beams.Structures Congress
  31. Hung, C.-C.,El-Tawil, S.(2010).Cyclic model for high performance fiber reinforced cementitious composite structures.Improving the Seismic Performance of Existing Buildings and Other Structures
  32. Hung, C.-C.,El-Tawil, S.(2011).Seismic behavior of a coupled wall system with HPFRC materials in critical regions.Journal of Structural Engineering,137,1499-1507.
  33. Hung, C.-C.,El-Tawil, S.(2010).Hybrid rotating/fixed-crack model for high-performance fiber-reinforced cementitious composites.ACI Materials Journal,107
  34. Hung, C.-C.,El-Tawil, S.,Chao, S.-H.(2021).A review of developments and challenges for UHPC in structural engineering: Behavior, analysis, and design.Journal of Structural Engineering,147,03121001.
  35. Hung, C.-C.,Hsieh, P.-L.(2020).Comparative study on shear failure behavior of squat high-strength steel reinforced concrete shear walls with various high-strength concrete materials.Structures,23,56-68.
  36. Hung, C.-C.,Hu, F.-Y.(2018).Behavior of high-strength concrete slender columns strengthened with steel fibers under concentric axial loading.Construction and Building Materials,175,422-433.
  37. Hung, C.-C.,Hu, F.-Y.,Yen, C.-H.(2018).Behavior of slender UHPC columns under eccentric loading.Engineering Structures,174,701-711.
  38. Hung, C.-C.,Hung, H.-H.(2020).Potential of sodium sulfate solution for promoting the crack-healing performance for strain-hardening cementitious composites.Cement and Concrete Composites,106,103461.
  39. Hung, C.-C.,Kuo, C.-W.,Shao, Y.(2021).Cast-in-place and prefabricated UHPC jackets for retrofitting sheardeficient RC columns with different axial load levels.Journal of Building Engineering,44,103305.
  40. Hung, C.-C.,Lee, H.-S.,Chan, S. N.(2019).Tension stiffening effect in steel-reinforced UHPC composites: Constitutive model and effects of steel fibers, loading patterns, and rebar sizes.Composites Part B: Engineering,158,269-278.
  41. Hung, C.-C.,Li, H.,Chen, H.-C.(2017).High-strength steel reinforced squat UHPFRC shear walls: Cyclic behavior and design implications.Engineering Structures,141,59-74.
  42. Hung, C.-C.,Li, S.-H.(2013).Three-dimensional model for analysis of high performance fiber reinforced cement-based composites.Composites Part B: Engineering,45,1441-1447.
  43. Hung, C.-C.,Su, Y.-F.(2016).Medium-term self-healing evaluation of engineered cementitious composites with varying amounts of fly ash and exposure durations.Construction and Building Materials,118,194-203.
  44. Hung, C.-C.,Su, Y.-F.(2013).On modeling coupling beams incorporating strain-hardening cement-based composites.Computers and Concrete,12,565-583.
  45. Hung, C.-C.,Su, Y.-F.,Hung, H.-H.(2017).Impact of natural weathering on medium-term self-healing performance of fiber reinforced cementitious composites with intrinsic crack-width control capability.Cement and Concrete Composites,80,200-209.
  46. Hung, C.-C.,Su, Y.-F.,Su, Y.-M.(2018).Mechanical properties and self-healing evaluation of strain-hardening cementitious composites with high volumes of hybrid pozzolan materials.Composites Part B: Engineering,133,15-25.
  47. Hung, C.-C.,Su, Y.-F.,Yu, K.-H.(2013).Modeling The shear hysteretic response for high performance fiber reinforced cementitious composites.Construction and Building Materials,41,37-48.
  48. Hung, C.-C.,Yen, C.-H.(2021).Compressive behavior and strength model of reinforced UHPC short columns.Journal of Building Engineering,35,102103.
  49. Hung, C.-C.,Yen, W.-M.(2014).Experimental evaluation of ductile fiber reinforced cement-based composite beams incorporating shape memory alloy bars.Procedia Engineering,79,506-512.
  50. Hung, C.-C.,Yen, W.-M.,Yu, K.-H.(2016).Vulnerability and improvement of reinforced ECC flexural members under displacement reversals: Experimental investigation and computational analysis.Construction and Building Materials,107,287-298.
  51. Ipek, M.,Yilmaz, K.,Sümer, M.,Saribiyik, M.(2011).Effect of pre-setting pressure applied to mechanical behaviours of reactive powder concrete during setting phase.Construction and Building Materials,25,61-68.
  52. Ji, T.,Chen, C.-Y.,Zhuang, Y.-Z.(2012).Evaluation method for cracking resistant behavior of reactive powder concrete.Construction and Building Materials,28,45-49.
  53. Jooss, M.,Reinhardt, H. W.(2002).Permeability and diffusivity of concrete as function of temperature.Cement and Concrete Research,32,1497-1504.
  54. Lee, M.-G.,Wang, Y.-C.,Chiu, C.-T.(2007).A preliminary study of reactive powder concrete as a new repair material.Construction and Building Materials,21,182-189.
  55. Li, J.,Wu, Z.,Shi, C.,Yuan, Q.,Zhang, Z.(2020).Durability of ultra-high performance concrete–A review.Construction and Building Materials,255,119296.
  56. Liu, C.-T.,Huang, J.-S.(2009).Fire performance of highly flowable reactive powder concrete.Construction and Building Materials,23,2072-2079.
  57. Liu, S.,Sun, W.,Lin, W.,Lai, J.(2003).Preparation and durability of a high performance concrete with natural ultra-fine particles.Guisuanyan Xuebao(Journal of The Chinese Ceramic Society),31,1080-1085.
  58. Long, G.,Xie, Y.,Wang, P.,Jiang, Z.(2005).Properties and micro/mecrostructure of reactive powder concrete.Journal of the Chinese Ceramic Society,33,456-461.
  59. Lu, K.,Xu, Q.,Li, W.,Hu, Y.,Wang, J.,Yao, Y.(2021).Fatigue performance of UHPC bridge deck system with field-cast dovetail joint.Engineering Structures,237,112108.
  60. Mazzacane, P.,Ricciotti, R.,Tollini, E.,Corvez, D.(2013).MUCEM: The builder's perspective.Proceedings UHPFRC
  61. Paredes, J. A.,Gálvez, J. C.,Enfedaque, A.,Alberti, M. G.(2021).Matrix optimization of ultra high performance concrete for improving strength and durability.Materials,14,6944.
  62. PIGEON, A.,CHARLON, P.,SALE, R.-G.,NOVARIN, M.(2007).Renforcement du tablier du pont sur l'Huisne-Le Mans.Travaux,839,49-54.
  63. Randl, N.,Steiner, T.,Ofner, S.,Baumgartner, E.,Mészöly, T.(2014).Development of UHPC mixtures from an ecological point of view.Construction and Building Materials,67,373-378.
  64. Richard, P.,Cheyrezy, M.(1995).Composition of reactive powder concretes.Cement and Concrete Research,25,1501-1511.
  65. Shao, Y.,Hung, C.-C.,Billington, S. L.(2021).Gradual crushing of steel reinforced HPFRCC beams: Experiments and simulations.Journal of Structural Engineering,147,04021114.
  66. Shao, Y.,Kuo, C.-W.,Hung, C.-C.(2021).Seismic performance of full-scale UHPC-jacket-strengthened RC columns under high axial loads.Engineering Structures,243,112657.
  67. Sharma, R.,Jang, J. G.,Bansal, P. P.(2022).A comprehensive review on effects of mineral admixtures and fibers on engineering properties of ultra-high-performance concrete.Journal of Building Engineering,45,103314.
  68. Sheheryar, M.,Rehan, R.,Nehdi, M. L.(2021).Estimating CO2 emission savings from ultrahigh performance concrete: A system dynamics approach.Materials,14,995.
  69. Shi, C.,Wu, Z.,Xiao, J.,Wang, D.,Huang, Z.,Fang, Z.(2015).A review on ultra high performance concrete: Part I. Raw materials and mixture design.Construction and Building Materials,101,741-751.
  70. Sun, W.,Jiao, C.(2011).Experimental study on impact tensile behavior of reactive powder concrete.Journal Of Guangzhou University (Natural Science Edition),10,42-47.
  71. Tai, Y.(2009).Flat ended projectile penetrating ultra-high strength concrete plate target.Theoretical and Applied Fracture Mechanics,51,117-128.
  72. Tai, Y.-S.,Pan, H.-H.,Kung, Y.-N.(2011).Mechanical properties of steel fiber reinforced reactive powder concrete following exposure to high temperature reaching 800 C.Nuclear Engineering and Design,241,2416-2424.
  73. Tam, C. M.,Tam, V. W.,Ng, K. M.(2012).Assessing drying shrinkage and water permeability of reactive powder concrete produced in Hong Kong.Construction and Building Materials,26,79-89.
  74. Voo, Y. L.,Foster, S. J.(2010).Characteristics of ultra-high performance ‘ductile’ concrete and its impact on sustainable construction.The IES Journal Part A: Civil & Structural Engineering,3,168-187.
  75. Wang, D.,Shi, C.,Wu, Z.,Xiao, J.,Huang, Z.,Fang, Z.(2015).A review on ultra high performance concrete: Part II. Hydration, microstructure and properties.Construction and Building Materials,96,368-377.
  76. Wille, K.,Naaman, A. E.,Parra-Montesinos, G. J.(2011).Ultra-high performance concrete with compressive strength exceeding 150 MPa (22 ksi): A simpler way.ACI Materials Journal,108
  77. Yang, C.,Chen, S.-C.,Yen, C.-H.,Hung, C.-C.(2022).Behaviour and detailing of coupling beams with high-strength materials.Journal of Building Engineering,47,103843.
  78. Yazıcı, H.,Yardımcı, M. Y.,Aydın, S.,Karabulut, A. Ş.(2009).Mechanical properties of reactive powder concrete containing mineral admixtures under different curing regimes.Construction and Building Materials,23,1223-1231.
  79. Yu, R.,Spiesz, P.,Brouwers, H.(2015).Development of an eco-friendly Ultra-High Performance Concrete (UHPC) with efficient cement and mineral admixtures uses.Cement and Concrete Composites,55,383-394.
  80. Zhang, M.,Shim, V.,Lu, G.,Chew, C.(2005).Resistance of high-strength concrete to projectile impact.International Journal of Impact Engineering,31,825-841.
  81. Zhou, M.,Lu, W.,Song, J.,Lee, G. C.(2018).Application of ultra-high performance concrete in bridge engineering.Construction and Building Materials,186,1256-1267.
  82. 王昱棋(2021)。國立成功大學土木工程學系。
  83. 周笙展(2021)。國立成功大學土木工程學系。
  84. 黃皇川(2019)。國立成功大學土木工程學系。
  85. 蕭信睿(2020)。國立成功大學土木工程學系。
print cancel