以數值計算方法評估方柱形狀建築物之受風效應

Evaluation of Wind Effect of a Square Prism by Numerical Simulation

10.6377/JA.201003.0119

方富民(F. M. Fang)；鍾政洋(C. Y. Chung)；李振豪(C. H. Li)

建築研究 ； 數值模擬 ； 風洞試驗 ； Building Study ； Numerical Simulation ； Wind Tunnel Test

建築學報

71期（2010 / 03 / 01）

119 - 132

繁體中文

本研究以大氣邊界層中平坦空曠地形上高寬比爲4之單一方柱爲基準問題，先以風洞建築模型試驗量取風場與柱體之風力係數作爲數值模擬結果驗證之基本資料，繼以微可壓縮流的計算流體動力學數值方法，配合以空間平均的大渦模擬與次網格紊流模型進行風場之計算，並將數值與量測結果相互比對驗證，進而評估數值模擬在建築風力分析之適用性與可行性。最後，研究中再依據數值模擬結果與風洞實驗數據之比對與探討，初步研擬工程實務上可接受的CFD模擬參考原則。

In the study, a single square building with an aspect ratio of 4 in a flat territory is set as the benchmark problem to assess how the application of numerical simulation is valid for the evaluation of the wind effects of the building. Wind tunnel measurements were firstly performed to measure the force coefficients associated with a building model and the results were taken as the basis for the verification of the numerical results. Numerical simulations, based on a weakly-compressible-flow method with a space-averaged large-eddy-simulation technique and a subgrid-scale turbulence model, were then carried out in parallel and the results were compared to the measurement data. After the accuracy and validity of the numerical method was verified, extensive numerical investigations were conducted to propose certain general guidelines for the applications of CFD methods in evaluating the wind effect buildings.

1. Delaunay, D.,Lakehal, D.,Pierrat, D.(1995).Numerical approach for wind loads prediction on buildings and structure.Journal of Wind Engineering and Industrial Aerodynamics,57,307-321.
2. Fang, F.M.(2006).Some CFD applications in bluff-body aerodynamics.Proceedings of Symposium on Future Development for Environment Restoration and Disaster Reduction Technologies,Taichung, Taiwan.:
3. Fang, F.M.,Li, Y.C.,Liang, T.C.(2003).CWE development in Taiwan.Proceedings of 2003 International Wind Engineering Symposium,Tansui, Taiwan:
4. Germano, U.,Piomelli, P.,Cabot, W.H.(1991).A dynamic subgrid-scale eddy viscosity model.Physics of Fluids,3,1760-1765.
5. Gomes, M.G.,Rodrigues, A.M.,Mendes, P.(2005).Experimental and numerical study of wind pressures on irregular-plan shapes.Journal of Wind Engineering and Industrial Aerodynamics,93,741-756.
6. Kondo, K.,Murakami, S.,Mochida, A.(1997).Generation of velocity fluctuations for inflow boundary condition of LES.Journal of Wind Engineering and Industrial Aerodynamics,67/68,51-64.
7. Mikkelsen, A.C.,Livesey, F.M.(1995).Evaluation of the use of the numerical k-ε model Kameleon II, for predict-ing wind pressures on building surface.Journal of Wind Engineering and Industrial Aerodynamics,57,375-389.
8. Murakami, S.,Mochida, A.(1995).On turbulent vortex shedding flow past 2D square cylinder predicted by CFD.Journal of Wind Engineering and Industrial Aerodynamics,54,191-211.
9. Murakami, S.,Mochida, A.,Hayashi, Y.,Sakamoto, S.(1992).Numerical study on velocity-pressure filed and wind forces for bluff bodies by ｋ-ε, ASM and LES.Journal of Wind Engineering and Industrial Aerodynamics,41-44,2841-2852.
10. Song, C.C.S.,Yuan, M.(1988).A weakly compressible flow model and rapid convergence methods.Journal of Fluids Engineering, Transactions ASME,110,441-455.
11. 內政部建築研究所、營建雜誌社編(2006)。建築物耐風設計規範及解說。台灣:營建雜誌社。