Joint Determination of Optimum Process Mean and Economic Specification Limits for Rectifying Inspection Plan with Inspection Error

具檢驗誤差的選剔檢驗計劃之最佳製程平均數與經濟規格界限設定

10.29977/JCIIE.200809.0005

陳忠和(Chung-Ho Chen)；Michael B.C. Khoo

製程平均數 ； 規格界限 ； 二次品質損失函數 ； 選剔檢驗計劃 ； 檢驗誤差 ； process mean ； specification limits ； quadratic quality loss function ； rectifying inspection plan ； inspection error

工業工程學刊

25卷5期（2008 / 09 / 01）

389 - 398

英文

Chen於2006年提出一考量產品在規格界限內具品質損失的修正Pulak與Al-Sultan模式以獲取最佳製程參數，然而，其模式並未考慮檢驗誤差存在的問題，本研究將提出具檢驗誤差的修正Chen模式來求解最佳製程平均數與經濟規格界限，最後並比較兩模式間解的差異。

In 2006, Chen presented a modified Pulak and Al-Sultan's model with quadratic quality loss function of product within the specification limits for determining the optimum process parameters. However, he did not consider the problem of inspection error. In this paper, the authors propose an integrated model for obtaining the optimum process mean and economic specification limits based on the modified Chen's model with inspection error. Finally, the numerical results and sensitivity analyses of the modified Chen's model with inspection error and those of Chen's model without inspection error are further provided for illustration.

1. Kim, Y. J.,B. R. Cho(2003).Determining the optimum process mean for a skewed process.International Journal of Industrial Engineering-Theory Applications and Practice,10,555-561.
   連結：
2. Bowling, S. R.,M. T. Khasawneh,S. Kaewkuekool,B. R. Cho(2004).Markovian approach to determining optimum process target levels for a multi-stage serial production system.European Journal of Operational Research,159,636-650.
3. Chan, W. M.,R. N. Ibrahim(2004).Evaluating the quality level of a product with multiple quality characteristics.International Journal of Advanced Manufacturing Technology,24,738-742.
4. Chan, W. M.,R. N. Ibrahim,P. B. Lochert(2005).Evaluating the product quality level under multiple L-type quality characteristics.International Journal of Advanced Manufacturing Technology,27,90-95.
5. Chan, W. M.,R. N. Ibrahim,P. B. Lochert(2005).Quality evaluation model using loss function for multiple S-type quality characteristics.International Journal of Advanced Manufacturing Technology,26,98-101.
6. Chen, C.H.(2006).The modified Pulak and Al-Sultan`s model for determining the optimum process parameters.Communications in Statistics-Theory and Methods,35,1767-1778.
7. Chen, S. L.,K. J. Chung(1994).Inspection error effects on economic selection of target value for a production process.European Journal of Operational Research,79,311-324.
8. Chen, S. L.,K. J. Chung(1996).Selection of the optimal precision level and target value for a production process: the lower-specification-limit case.IIE Transactions,28,979-985.
9. Duffuaa, S. O.,A. W. Siddiqui(2003).Process targeting with multi-class screening and measurement error.International Journal of Production Research,41,1373-1391.
10. Feng, Q.,K. C. Kapur(2006).Economic design of specifications for 100% inspection with imperfect measurement systems.Quality Technology & Quantitative Management,3,127-144.
11. Feng, Q.,K. C. Kapur(2006).Economic development of specifications for 100% inspection based on asymmetric quality loss functions.IIE Transactions,38,659-669.
12. Ferrell, W. G.,A. Chhoker(2002).Design of economically optimal acceptance sampling plans with inspection error.Computers and Operations Research,29,1283-1300.
13. Hariga, M. A.,M. A. Al-Fawzan(2005).Joint determination of target value and production run for a process with multiple markets.International Journal of Production Economics,96,201-212.
14. Hong, S. H.,E. A. Elsayed(1999).The optimum mean for processes with normally distributed measurement error.Journal of Quality Technology,31,338-344.
15. Hong, S. H.,H. Kwon,M. K. Lee,B. R. Cho(2006).Joint optimization in process target and tolerance limit for L-type quality characteristics.International Journal of Production Research,44,3051-3060.
16. Kapur, K. C.(1988).An approach for development of specifications for quality improvement.Quality Engineering,1,63-77.
17. Kapur, K. C.,B. R. Cho(1994).Economic design and development of Specifications.Quality Engineering,6,401-417.
18. Kapur, K. C.,B. R. Cho(1996).Economic design of the specification region for multiple quality characteristics.IIE Transactions,28,237-248.
19. Kapur, K. C.,Wang, C. J.,R. E. DeVor,S. G. Kapoor (eds)(1987).Quality: Design, Planning, and Control.Boston, MA:The American Society of Mechanical Engineers.
20. Lee, M. K.,S. B. Kim,H. M. Kwon,S. H. Hong(2004).Economic selection of mean value for a filling process under quadratic quality loss.International Journal of Reliability, Quality and Safety Engineering,11,81-90.
21. Markowski, E. P.,C. A. Markowski(2002).Improved attribute acceptance sampling plans in the presence of misclassification error.European Journal of Operational Research,139,501-510.
22. Pulak, M. F. S.,K. S. Al-Sultan(1996).The optimum targeting for a single filling operation with rectifying inspection.Omega,24,727-733.
23. Rahim, M. A.,F. Tuffaha(2004).Integrated model for determining the optimal initial settings of the process mean and optimal production run assuming quadratic loss functions.International Journal of Production Research,42,3281-3300.
24. Taguchi, G.(1986).Introduction to Quality Engineering.Tokyo, Japan:Asian Productivity Organization.
25. Tang, K.(1987).The effects of inspection error on a complete inspection plan.IIE Transactions,19,421-428.
26. Tang, K.,J. Tang(1994).Design of screening procedure: a review.Journal of Quality Technology,26,209-226.
27. Taseli, A.,G. Kohsal(2006).The effect of inspection error and rework on quality loss.Proceedings of the 35th International Conference on Computers and Industrial Engineering,Istanbul, Turkey:
28. Teeravaraprug, J.(2005).Determining optimal process mean of two-market products.International Journal of Advanced Manufacturing Technology,25,1248-1253.

1. Chen, Chung-Ho(2010).Modified Economic Manufacturing Quantity Model for Product with Quality Loss under the Serial Production System and Rectifying Inspection Plan.品質學報,17(2),99-113.
2. Chen, Chung-Ho(2012).Optimum Profit Model Considering Single Sampling Inspection Plan and Quality Loss of Product.品質學報,19(3),207-221.
3. Zeephongsekul, Panlop,Chen, Chung-Ho(2012).Optimum Profit Model between Producer and Purchaser by Considering Quality Investment.品質學報,19(3),265-291.
4. Zeephongsekul, Panlop,Chen, Chung-Ho(2012).Optimum Profit Model between Producer and Purchaser by Considering Quality Investment.品質學報,19(3),265-291.
5. (2019).Process quality improvement based on the application of rectifying sampling inspection plan.工業工程學刊,36(4),8-12.