题名

應用國人頭型資料庫探討安全帽尺寸分類

并列篇名

A Study of Safety Helmet Size in Relation to Size Classification in Taiwan's Worker Craniofacial Database

DOI

10.7005/JOSH.200603.0048

作者

李建璁(Jian-Cong Li)；林彥輝(Yen-Hui Lin)；楊宜學(Yi-Xue Yang)；陳志勇(Chih-Yong Chen)

关键词

安全帽 ； 尺寸 ； 頭型 ； Helmet ； Size ； Headform

期刊名称

勞工安全衛生研究季刊

卷期/出版年月

14卷1期（2006 / 03 / 01）

页次

48 - 57

内容语文

繁體中文
中文摘要

本研究以國人頭型資料庫為基礎，進行中國國家標準(CNS 2396-Z2009)「乘坐機車用安全帽」之分類模式統計分析與比對，以瞭解CNS標準所規範之大型、標準型、小型安全帽尺寸分類方式與國人頭型資料的適用性。 研究結果顯示現有CNS標準頭模較實際情形為短，且樣本資料尺碼越大，最大頭圍水平位置與FH平面距離越短，越貼近眉間點；反之頭圍越小者，其水平位置向上偏移。本研究建議依CNS標準來設計安全帽時，需進行局部尺寸調整，以吻合國人頭型尺寸。
英文摘要

The objective of this study is to evaluate the suitability of the safety helmet size classifications in the Chinese National Standards (CNS 2396-Z2009). The study compares the head sizes in the worker craniofacial database with the size classifications of motorcycle helmet performance standards in the Chinese National Standards. The results reveal that the CNS standard head shapes are actually shorter than those shown in real data under the same classification conditions. The distance between the maximum head circumference and the Frankfort Horizontal Plane is shown to be shorter in comparison with the native head shape. Based on the Chinese National Standards, the sizes of safety helmets should be adjusted slightly to match the size of laborers' typical craniofacial manikins.
主题分类 醫藥衛生 > 預防保健與衛生學
醫藥衛生 > 社會醫學
社會科學 > 社會學
参考文献
  1. Hokeyjournal
  2. Travis County SuperCyclist Project
  3. IronHorse Helmet
  4. Texas Department of Health
  5. AFX HELMETS
  6. Bell Helmet
  7. 인 체 측 정 학 인 체 측 정 학 의 정 의
  8. National Biodynamics Laboratory, National Crash Survival Data Bank
  9. AS/NZS(1998).Australian/New Zealand Standard, Methods of testing protective helmets Method 1: Definitions and headforms.
  10. University of Newcastle upon Tyne
  11. Chinese National Standards(1998).Bureau of Standards, Metrology and Inspection.Taiwan, R.O.C.:Ministry of Economic Affairs, Executive Yuan.
  12. Donelson, S. M.,Gordon, C. C.(1991).1988 Anthropometric survey of U.S. Army personnel: Pilot summary statistics.Natick, MA:U.S. Army Natick Research, Development.
  13. Hobbs, P. C.(1973).An Anthropometric Survey of 500 Royal Air Force Aircrew Heads.London:Royal Aircraft Establishment.
  14. Institute of Occupational Safety and Health,Council of Labor Affairs,Executive Yuan(1995).The study for workers` typical craniofacial manikins.Taiwan, R.O.C.:IOSH.
  15. Institute of Occupational Safety and Health,Council of Labor Affairs,Executive Yuan(1996).Design of a comfortable industrial helmet.Taiwan, R.O.C.:IOSH.
  16. ISO International Organization for Standardization(1970).Protective helmets for road users.Switzerland:
  17. ISO International Organization for Standardization(1977).Industrial Safety helmets.Switzerland:
  18. JIS Japan Industrial Standards(1994).Protective helmets for vehicular users.Tokyo, Japan:
  19. Kevin M. Kelly.Importance of Early Recognition and Treatment of Deformational Plagiocephaly with Orthotic Cranioplasty.
  20. National Institute of Bioscience and Human-Technology Nippon Shuppan Service(1996).Japanese Body dimensions Data for Ergonomic Design.
  21. Research Institute of Human Engineering for Quality Life(1998).Japanese Body Size Data.
  22. Schultz, A. H.(1929).The technique of measuring the outer body of human fetuses and of primates in general.Contributions to Embryology,117,213-257.
  23. Snell Memorial Foundation(2000).Standard for Protective Headgear.
  24. White, R. M.(1961).Anthropometry of Army Aviators.Natick, MA:Quartermaster Research & Engineering Center.
  25. Yoganandan, N.,F.A. Pintar,S.J. Larson,A. Sances, Jr.(1998).Frontiers in Head and Neck Trauma.
print cancel