题名

新產品開發加速機制與新產品開發績效指標對專案成功影響之研究

并列篇名

The Impacts of NPD Acceleration Mechanism, NPD Speed, Cost, and Quality on Project Success

DOI

10.6378/JTM.200712.0101

作者

林明杰(Ming-Ji James Lin)；蔣宜哲(I-Che Chiang)；黃錦華(Chin-Hua Huang)

关键词

加速機制 ； 新產品開發速度 ； 開發成本 ； 開發品質 ； 專案成功 ； Acceleration Mechanism ； NPD Speed ； NPD Quality ； NPD Cost ； Project Success

期刊名称

科技管理學刊

卷期/出版年月

12卷4期（2007 / 12 / 01）

页次

101 - 144

内容语文

繁體中文
中文摘要

本研究依據過去新產品開發文獻，提出一個結合加速機制、新產品開發績效指標（包括：開發速度、開發成本、開發品質）與新產品專案成功之理論架構，並試圖驗證各構面間之關係。研究設計以台灣高科技製造業為研究樣本，專案為分析單位進行問卷調查，並透過結構方程模式驗證研究假說。主要研究發現為：(1)除了「外部技術來源加速機制」一項外，其他加速機制都能有效加速新產品開發速度；(2)「內部公司層級加速機制」對專案成功有正向的直接效果與間接效果，而「內部計畫層級加速機制」與「外部技術來源加速機制」兩項則僅有間接效果；(3)新產品開發速度愈快，愈能降低開發成本以及提升開發品質。
英文摘要

Based on the studies of New Product Development (NPD), this research presents a conceptual framework of the interrelationships among acceleration mechanisms, NPD performance and NPD project success. The data was collected from 168 projects of high-tech manufacturers in Taiwan by using questionnaires and was analyzed on LISREL. The findings show that (1) most acceleration mechanisms would facilitate NPD speed effectively except the external sourcing of knowledge; (2) internal corporate-level acceleration mechanism has a positive direct and indirect influences on project success, while two acceleration mechanisms of internal project-level and external sourcing of knowledge only have indirect effects; (3) the result identifies a significant positive relationship between NPD speed and quality as well as a significant negative relationship between NPD speed and cost.
主题分类 社會科學 > 管理學
参考文献
  1. Anderson, J. C.,Gerbing, D.W.(1988).Structural Equation Modeling in Practice: A Review and Recommended Two-Step Approach.Psychological Bulletin,103(3),411-423.
  2. Andersson, L. M.,Bateman, T. S.(1997).Cynicism in the Workplace: Some Causes and Effect.Journal of Organizational Behavior,18(5),449-469.
  3. Bagozzi, R. P.,Yi, Y.(1988).On the Evaluation for Structural Equation Models.Journal of the Academy of Marketing Science,16(1),74-94.
  4. Balbontin, A.,Yazdani, B.,Cooper, R.,Souder, W. E.(1999).New Product Development Success Factors in American and British Firms.International Journal of Technology Management,17(3),259-279.
  5. Baumgartner, H.,Homburg, C.(1996).Applications of Structural Equation Modeling in Marketing and Consumer Research: A Review.International Journal of Research in Marketing,13(2),139-161.
  6. Bayus, B. L.(1997).Speed-to-Market and New Product Performance Trade-offs.Journal of Product Innovation Management,14(6),485-497.
  7. Brown, S. L.,Eisenhardt, K. M.(1995).Product Development: Past Research, Present Findings, and Future Directions.The Academy of Management Review,20(2),343-378.
  8. Brown, W. B.,Karagozoglu, N.(1993).Leading the Way to Faster New Product Development.Academy of Management Executive,7(1),36-47.
  9. Bstieler, L.(2005).The Moderating Effect of Environmental Uncertainty on New Product Development and Time Efficiency.Journal of Product Innovation Management,22(3),267-284.
  10. Burkart, E. E.(1994).Reducing R&D Cycle Time.Research-Technology Management,37(3),27-31.
  11. Calantone, R. J.,Di Benedetto, C. A.(2002).Performance and Time to Market: Accelerating Cycle Time with Overlapping Stages.IEEE Transactions on Engineering Management,47(2),232-244.
  12. Calantone, R. J.,Schmidt, J. B.,Di Benedetto, C.A.(1997).New Product Activities and Performance: The Moderating Role of Environmental Hostility.Journal of Product Innovation Management,14(3),179-189.
  13. Calantone, R.,Garcia, R.,Droge, C.(2003).The Effect of Environment Turbulence on New Product Development Strategy Planning.Journal of Product Innovation Management,20(2),90-103.
  14. Chakrabarti, A. K.(1974).The Role of Champions in Product Innovation.California Management Review,17(2),58-62.
  15. Chakrabarti, A. K.,Hauschild, J.(1989).The Division of Labour in Innovation Management.R&D Management,19(2),161-171.
  16. Chen, C.-C.,Yeh, T.-M.,Yang, C.-C.(2006).Performance Measurement for New Product Development: A Model Based on Total Costs.International Journal of Production Research,44(21),4631-4648.
  17. Chen, J.,Reilly, R. R.,Lynn, G. S.(2005).The Impacts of Speed-to-Market on New Product Success: The Moderating Effects of Uncertainty.IEEE Transactions on Engineering Management,52(2),199-212.
  18. Chin, W. W.,Todd P.(1995).On the Use, Usefulness, and Ease of Use of Structural Equation Modeling in MIS Research: A Note of Caution.MIS Quarterly,19(2),237-246.
  19. Clark, K. B.(1989).Project Scope and Project Performance: The Effect of Parts Strategy and Supplier Involvement on Product Development.Management Science,35(10),1247-1263.
  20. Clark, K. B.,Fujimoto, T.(1991).Product Development Performance.Boston, MA:Harvard Business School Press.
  21. Cooper, R. G.(1988).Predevelopment Activities Determine New Product Success.Industrial Marketing Management,17(3),237-247.
  22. Cooper, R. G.(1995).Developing New Products on Time, in Time.Research-Technology Management,38(5),49-57.
  23. Cooper, R. G.,Kleinschmidt, E. J.(1995).Benchmarking the Firm`s Critical Success Factors in New Product Development.Journal of Product Innovation Management,12(5),374-391.
  24. Cooper, R. G.,Kleinschmidt, E. J.(1994).Determinants of Timeliness in Product Development.Journal of Product Innovation Management,11(5),381-396.
  25. Cordero, R.(1991).Managing for Speed to Avoid Product Obsolescence: A Survey of Techniques.Journal of Product Innovation Management,8(4),283-294.
  26. Crawford, C. M.(1992).The Hidden Costs of Accelerated Product Development.Journal of Product Innovation Management,9(3),188-199.
  27. Davis, P. S.,Dibrell, C. C.,Janz, B. D.(2002).The Impact of Time on the Strategy-Performance Relationship: Implications for Managers.Industrial Marketing Management,31(4),339-347.
  28. Deschamps, J. P.,Nayak, P. R.(1992).Competing Through Products: Lessons From the Winners.Journal of World Business,27(2),38-54.
  29. Ellis, L. W.,Curtis, C. C.(1995).Speed R&D: How Beneficial?.Research-Technology Management,38(4),42-51.
  30. Emmanuelides, A. P.(1991).Determinants of Product Development Time: A Framework for Analysis.Academy of Management Best Paper Proceedings.
  31. Emmanuelides, P. A.(1993).Toward an Integrative Framework of Performance in Product Development Projects.Journal of Engineering and Technology Management,10(4),363-392.
  32. Ernst, H.(2002).Success Factors of New Product Development: A Review of the Empirical Literature.International Journal of Management Reviews,4(1),1-40.
  33. Gold, B.(1987).Approaches to Accelerating Product and Process Development.Journal of Product Innovation Management,4(2),81-88.
  34. Gonzalez, F. J. M.,Palacios, T. M. B.(2002).The Effect of New Product Development Techniques on New Product Success in Spanish Firms.Industrial Marketing Management,31(3),261-271.
  35. Gopalakrishnan, S.,Bierly, P. E.(2006).The Impact of Firm Size and Age on Knowledge Strategies During Product Development: a Study of the Drug Delivery Industry.IEEE Transactions on Engineering Management,53(1),3-16.
  36. Griffin, A.(2002).Product Development Cycle Time for Business-to-Business Products.Industrial Marketing Management,31(4),291-304.
  37. Gupta, A. K.,Brockhoff, K.,Weisenfeld, U.(1992).Making Trade-Offs in the New Product Development Process: A German/US Comparison.Journal of Product Innovation Management,9(1),11-18.
  38. Gupta, A. K.,Souder, W. E.(1998).Key Drivers of Reduced Cycle Time.Research-Technology Management,41(4),38-43.
  39. Gupta, A. K.,Wilemon, D. L.(1990).Accelerating the Development of Technology-Based New Products.California Management Review,32(2),24-44.
  40. Hamel, G.,Prahalad, C. K.(1991).Corporate Imagination and Expeditionary Marketing.Harvard Business Review,69(4),81-92.
  41. Handfield, R. B.(1994).Effects of Concurrent Engineering on Make-to-Order Products.IEEE Transactions on Engineering Management,41(4),384-393.
  42. Harter, D.E.,Krishnan, M.S.,Slaughter, S.A.(2000).Effects of Process Maturity on Quality, Cycle Time, and Effort in Software Product Development.Management Science,46(4),451-466.
  43. Howell, J. M.,Higgins, C. A.(1990).Champions of Technological Innovation.Administrative Science Quarterly,35(2),317-341.
  44. Ittner, C. D.,Larcker, D. F.(1997).Product Development Cycle Time and Organizational Performance.Journal of Marketing Research,34(1),13-23.
  45. Jacobson, R.,Aaker, D. A.(1985).Is Market Share All That It`s Cracked Up to Be?.Journal of Marketing,49(4),11-22.
  46. Jayaram, J.,Narasimhan, R.(2007).The Influence of New Product Development Competitive Capabilities on Project Performance.IEEE Transactions on Engineering Management,54(2),241-256.
  47. Jetter, A. J.,D.F. Kocaoglu,T.R. Anderson (Editors)(2003).Technology Management for Reshaping the World.Portland:PICMET.
  48. Judge, W. Q.,Miller, A.(1991).Antecedents and Outcomes of Decision Speed in Different Environmental Contexts.Academy of Management Journal,34(2),449-463.
  49. Karagozoglu, N.,Brown, W. B.(1993).Time-Based Management of the New Product Development Process.Journal of Product Innovation Management,10(3),204-215.
  50. Katz, R.,Allen, T. J.(1982).Investigating the Not Invented Here (NIH) Syndrome: A Look at the Performance, Tenure, and Communication Patterns of 50 R&D Project Groups.R&D Management,12(1),7-19.
  51. Keller, R. T.(1994).Technology-Information Processing Fit and the Performance of R&D Project Groups: A Test of Contingency Theory.Academy of Management Journal,37(1),167-179.
  52. Kessler, E. H.,Bierly, P. E.(2002).Is Faster Really Better? An Empirical Test of the Implications of Innovation Speed.IEEE Transactions on Engineering Management,49(1),2-12.
  53. Kessler, E. H.,Bierly, P. E.,Gopalakrishnan, S.(2000).Internal vs. External Learning in New Product Development: Effects on Speed, Costs and Competitive Advantage.R&D Management,30(3),213-223.
  54. Kessler, E. H.,Chakrabarti, A. K.(1999).Speeding up the Pace of New Product Development.Journal of Product Innovation Management,16(3),231-247.
  55. Kessler, E. H.,Chakrabarti, A. K.(1996).Innovation Speed: A Conceptual Model of Context, Antecedents and Outcomes.Academy of Management Review,21(4),1143-1191.
  56. Lane, P. J.,Lubatkin, M.(1998).Relative Absorptive Capacity and Interorganizational Learning.Strategic Management Journal,19(5),461-477.
  57. Langerak, F.,Hultink, E. J.(2005).The Impact of New Product Development Acceleration Approaches on Speed and Profitability: Lessons for Pioneers and Fast Followers.IEEE Transactions on Engineering Management,52(1),30-42.
  58. Langerak, F.,Hultink, E. J.(2006).The Impact of Product Innovativeness on the Link between Development Speed and New Product Profitability.Journal of Product Innovation Management,23(3),203-214.
  59. Langerak, F.,Peelen, E.,Nijssen, E. A(1999).A Laddering Approach to the Use of Methods and Techniques to Reduce the Cycle Time of New-to-the-Firm Products.Journal of Product Innovation Management,16(2),173-182.
  60. Lieberman, M. B.,Montgomery, D. B.(1988).First-mover advantages.Strategic Management Journal,9(Summer Special Issue),41-58.
  61. Loch, C.,Stein, L.,Terwiesch, C.(1996).Measuring Development Performance in the Electronics Industry.Journal of Product Innovation Management,13(1),3-20.
  62. Lynn, G. S.,Simpson, J. T.,Souder, W. E.(1997).Effects of Organizational Learning and Information-Processing Behaviors on New Product Success.Marketing Letters,18(1),33-39.
  63. Lynn, G. S.,Skov, R. B.,Abel, K. D.(1999).Practices That Support Team Learning and their Impact on Speed to Market and New Product Success.Journal of Product Innovation Management,16(5),439-454.
  64. Mabert, V. A.,Muth, J. F.,Schmenner, R. W.(1992).Collapsing New Product Development Times: Six Case Studies.Journal of Product Innovation Management,9(3),200-212.
  65. Mansfield, E.(1988).The Speed and Cost of Industrial Innovation in Japan and the United States: External vs. Internal Technology.Management Science,34(10),1157-1169.
  66. McDonough, E. F.(1993).Faster New Product Development: Investigating the Effects of Technology and Characteristics of the Project Leader and Team.Journal of Product Innovation Management,10(3),241-250.
  67. McDonough, E. F.,Barczak, G.(1991).Speeding up New Product Development: The Effects of Leadership Style and Source of Technology.Journal of Product Innovation management,8(3),203-211.
  68. McDonough, E. F.,Spital, F. C.(1984).Quick-Response New Product Development.Harvard Business Review,62(5),52-57.
  69. Menon, A,Chowdhury, J,Lukas, B. A.(2002).Antecedents and Outcomes of New Product Development Speed-An Interdisciplinary Conceptual Framework-An interdisciplinary conceptual framework.Industrial Marketing Management,31(4),317-328.
  70. Meyer, C.(1993).Strategy, and Structure for Speed.New York:Free Press.
  71. Meyer, C.,Purser, R. E.(1993).Six Steps to Becoming a Fast-Cycle-Time Competitor.Research-Technology Management,36(5),41-48.
  72. Meyer, M. H,Utterback, J. M.(1995).Product Development Cycle Time and Commercial Success.IEEE Transactions on Engineering Management,42(4),297-304.
  73. Millson, M. R.,Raj, S. P.,Wilemon D.(1992).A Survey of Major Approaches for Accelerating New Product Development.Journal of Product Innovation Management,9(1),53-69.
  74. Montoya-Weiss, M. M.,Calantone, R.(1994).Determinants of New Product Performance: A Review and Meta-Analysis.Journal of Product Innovation Management,11(5),397-417.
  75. Niedrich, R. W.,Swain, S. D.(2004).The Influence of Pioneer Status and Experience Order on Consumer Brand Preference: A Mediated-Effect Model.Journal of the Academy of Marketing Science,31(4),468-480.
  76. Nijssen E. J.,Arbouw A. R. L.,Commandeur H. R.(1995).Accelerating New Product Development: A Preliminary Empirical Test of a Hierarchy of Implementation.Journal of Product Innovation Management,12(2),99-109.
  77. Page, A.(1993).Assessing New Product Development Practices and Performance: Establishing Crucial Norms.Journal of Product Innovation Management,10(4),273-290.
  78. Reed, R.,DeFillipi, R. J.(1990).Causal Ambiguity, Barriers to Imitation, and Sustainable Competitive Advantage.The Academy of Management Review,15(1),88-102.
  79. Roberts, E. B.(1988).Managing Invention and Innovation.Research-Technology Management,31(1),11-29.
  80. Rosenau, M. D.(1988).Faster New Product Development.Journal of Product Innovation Management,5(2),150-153.
  81. Rosenthal, S. R.(1992).Effective Product Design and Development: How to Cut Lead Time and Increase Customer Satisfaction.Homewood, IL:Business One Irwin.
  82. Rosenthal, S. R,Tatikonda, M. V.(1993).Time Management in New Product Development: Case Study Findings.Engineering Management Review,21(3),13-20.
  83. Rosenthal, S. R,Tatikonda, M. V.(1992).Time Management in New Product Development: Case Study Findings.Journal of Manufacturing Systems,11(5),359-368.
  84. Rummel, R. J.(1970).Applied Factor Analysis.Evanston, Illinois:Northwestern University Press.
  85. Scott, S.,Bruce, R.(1994).Determinant of Innovative Behaviour: A Path Model of Individual Innovation in the Workplace.Academy of Management Journal,37(3),580-607.
  86. Sherman, D. J.,Souder, W. E.,Jenssen, S. A.(2000).Differential Effects of the Primary Forms of Cross Functional Integration on Product Development Cycle Time.Journal of Product Innovation Management,17(4),257-267.
  87. Smith, P. G.(1999).From Experience: Reaping Benefit from Speed to Market.Journal of Product Innovation Management,16(3),222-230.
  88. Smith, P. G.,Reinertsen, D. G.(1991).Developing Products in Half the Time.New York:Van Nostrand Reinhold.
  89. Stalk, G.(1988).Time-The Next Source of Competitive Advantage.Harvard Business Review,66(4),41-50.
  90. Szakonyi, R.(1988).Dealing with a Nonobvious Source of Problems Related to Selecting R&D to Meet Customer`s Future Needs: Weaknesses within an R&D Organization`s and Within a Marketing Organization`s Individual Operations.IEEE Transactions on Engineering Management,35(1),37-41.
  91. Tatikonda, M. V.,Montoya-Weiss, M. M.(2001).Integrating Operations and Marketing Perspectives of Product Innovation: The Influence of Organizational Process Factors and Capabilities on Development Performance.Management Science,47(1),151-172.
  92. Terwiesch, C.,Loch, C.,Niederkofler, M.(1998).When Product Development Performance Makes a Difference: A Statistical Analysis in the Electronics Industry.Journal of product Innovation Management,15(1),3-15.
  93. Van de Ven, A.H.(1986).Central Problems in the Management of Innovation.Management Science,32(5),590-607.
  94. Venkatesan, R.(1992).Strategic Sourcing: to Make or not to Make.Harvard Business Review,70(6),98-107.
  95. Von Hippel, E.(1986).Lead Users: A Source of Novel Product Concepts.Management Science,32(7),791-805.
  96. Wheelwright, S. C.,Clark, K. B.(1992).Revolutionizing Product Development.New York:The Free Press.
  97. Zedtwitz, M.(2002).Organizational Learning through Post-Project Reviews in R&D.R&D Management,32(3),255-268.
  98. Zirger, B. J.,Maidique, M. A.(1990).A Model of New Product Development: An Empirical Test.Management Science,36(7),867-883.
print cancel