Study on Deformation Motion and Mechanical Model of the Shaft of the Wellbore Trajectory Control Tool

10.6180/jase.2017.20.4.04

Hong Zhang；Yijing Feng；Zhengxin Xiang；Ding Feng

Deformation Movement ； Mechanical Model ； Lab Testing ； Wellbore Trajectory Control Tool ； Shaft ； Bias Units

淡江理工學刊

20卷4期（2017 / 12 / 01）

435 - 443

英文

The build-up rate and steering force of the wellbore trajectory control tool has a close relationship with its shaft deformation, which mainly depends on the eccentric movement of the shaft and its flexural deformation. In combination with the working principle of the shaft of the tool, the deformation motion of the shaft was analyzed first, based on which, the flexural equation of the shaft at the static bias state was deduced as well as its angle equations, bearing reaction equations and bending moment equations. According to the deduced equations, the mechanical model of the shaft was established and optimized. To test and verify the reliability and feasibility of the model, the lab simulation experiment was carried out by using the dynamic simulation test bench of the wellbore trajectory control tool, and the bit deflection angle was acquired. Acomparison was made between the data from the model and the one from the experiments. The results show that the data measured in experiments is very close to the data derived from the theoretical equations, thus verifying the feasibility of the established mechanical model of the shaft, which provides reference for the shaft design of the wellbore trajectory control tool.