汽車單臂雨刷動態分析

Dynamics Analysis of Single-lever Windshield Wiper Systems

黃榮文(Rong-Wen Huang)；陳建良(Jian-Liang Chen)

雨刷膠條 ； 虛擬原型 ； 柔性體 ； Windshield wiper blade ； Virtual prototype ； Flexible body

車輛工程學刊

10期（2013 / 06 / 01）

103 - 114

繁體中文

一個良好的汽車雨刷系統，有賴於雨刷膠條與擋風玻璃間的服貼度適中，受力狀況（包含應力、應變及形變量）平均分佈，以發揮清除雨滴及汚漬的最佳功能，並得到雨刷膠條的最大使用壽命。本研究分析汽車雨刷動態特性，並使用國內乘用車三菱Freeca車種之後擋風玻璃的單臂雨刷系統為例，建製實體模組，並以ADAMS及ANSYS建構其虛擬原型，模擬真實情況下，進行雨刷與擋風玻璃之間的動態分析，其步驟如下：（1）SolidWorks及ADAMS軟體的初始模型建構，（2）ANSYS軟體之雨刷膠條柔性體建構，（3）ADAMS整合初始模型及雨刷膠條柔性體成虛擬原型以及接觸力的設定，（4）最後經由ADAMS的動態模擬來進行分析。由模擬結果得知，在掃掠過程中的形變量均勻而對稱分佈於雨刷膠條兩側，且其應力應變分佈均勻，驗證本研究虛擬原型的可行性。未來將進一步進行實體模組雨刷膠條的應力應變量測，以驗證模擬結果。

A functional and reliable windshield wiper system relies on how well the blades can closely adhere to the curvature of the windshield, as well as how evenly can forces be applied to maximize the cleaning function and prolong the lifespan of the blades themselves. This study analyzes the dynamic behaviors of windshield wipers using the rear windshield wiper system of a domestic passenger vehicle (Mitsubishi Freeca) as a physical model. Virtual prototype is constructed using ADAMS and ANSYS to perform simulations and analyses through the following steps: 1) utilize SolidWorks and ADAMS software to build the primitive models, 2) use ANSYS to construct the flexible body of the blade, 3) use ADAMS to integrate the primitive models and flexible body, and set the contact force between the blades and the windshield, and 4) perform dynamics simulation with ADAMS and analyze the results.From the simulation results, the even distribution of the wiper deformation, stress and strain on the blade validates the feasibility of the constructed virtual prototype. Future works will further measure the stress and strain of the physical wiper model to validate the accuracy of the simulation results.

1. 胡詠翔(2016)。複合型雨刷之模型驗證與碰撞模擬。屏東科技大學機械工程系所學位論文。2016。1-96。