题名

Minimum Average Fraction Inspected for Modified CSP-1 Plan

并列篇名

使平均檢驗率為最小的修正連續抽樣計劃

DOI

10.30166/PPMR.200401.0003

作者

陳忠和(Chung-Ho Chen)；周昭宇(Chao-Yu Chou)

关键词

第一型連續抽樣計劃 ； 平均出廠品質 ； 平均出廠品質界限 ； 平均檢驗率 ； Type I Continuous Sampling Plan CSP-1 Plan ； Average Outgoing Quality AOQ ； Average Outgoing Quality Limit AOQL ； Average Fraction Inspected AFI

期刊名称

Pan-Pacific Management Review

卷期/出版年月

7卷1期（2004 / 01 / 01）

页次

35 - 43

内容语文

英文
中文摘要

本研究考慮使平均檢驗率為最小的Govindaraju與Kandasamy具允收數的單水準連續抽樣計劃（修正連續抽樣計劃）的問題，文中將提出求解程序來獲得滿足特定平均出廠品質界限要求下，當製程平均數為已知時，能達成檢驗率為最小的修正連續抽樣計劃的參數。
英文摘要

This paper presents the problem of minimizing the average fraction inspected (AFI) for Govindaraju and Kandasamy's (2000) single level continuous sampling plan with the acceptance number (modified CSP-1 plan). A solution procedure is developed to find the parameters(superscript (i, f)) that will meet the average outgoing quality limit (AOQL) requirement, while also minimizing the AFI for the modified CSP-1 plan when the process average(superscript (average)p (＞AOQL)) is known.
主题分类 社會科學 > 管理學
参考文献
  1. Chen, C. H.,Cheng, T. S.,Chou, C. Y.(2001).Minimum average fraction inspected for TCSP-1 plan.Journal of Applied Statistics,28,793-799.
  2. Dodge, H.F.(1943).A sampling inspection plan for continuous production.Annals of Mathematical Statistics,14,264-279.
  3. Ghosh, D. T.(1988).The continuous sampling plan that minimises the amount of inspection.Sankhya, series B,50,412-427.
  4. Govindaraju K.,Balamurali S.(1998).Tightened single-level continuous sampling plan.Journal of Applied Statistics,25,451-461.
  5. Govindaraju K.,Kandasamy C.(2000).Design of generalized CSP-C continuous sampling plan.Journal of Applied Statistics,27,829-841.
  6. Montgomery, D.C.(1991).Introduction to Statistical Quality Control.New York:John Wiley & Sons Inc..
  7. Resnikoff, G. J.(1960).Minimum average fraction inspected for a continuous sampling plan.Journal of Industrial Engineering,11,208-209.
被引用次数
  1. Yu, Hong-Fwu,Lin, Tien-Yu(2009).AN OPTIMAL POLICY FOR CSP-1 WITH INSPECTION ERRORS AND RETURN COST.工業工程學刊,26(1),70-76.
  2. Yu, Wen-Ching,Yu, Hong-Fwu(2011).A Joint Inspection Policy between CSP-1 and Precise Inspection for Non-repairable Products under Inspection Errors and Return Cost.品質學報,18(1),61-74.
  3. 陳亭彣、于鴻福(2013)。考量檢驗誤差和退貨成本下之MLP-2和精密檢驗的最適混合檢驗策略。品質學報，20(1)，115-136。
  4. (2012).A mixed inspection policy for csp-t and precise inspection under inspection errors and return cost.工業工程學刊,29(6),417-426.
print cancel