A Two-Stage Virtual Impactor for In-Stack Sampling of PM_(2.5) and PM_(10) in Flue Gas of Stationary Sources

10.4209/aaqr.2015.06.0383

Masashi Wada；Mayumi Tsukada；Norikazu Namiki；Wladyslaw W. Szymanski；Naoki Noda；Hisao Makino；Chikao Kanaoka；Hidehiro Kamiya

PM_(2.5) ； PM_(10) ； Mass concentration ； Stationary sources ； Virtual impactor ； Conventional impactor ； Particle bounce

Aerosol and Air Quality Research

16卷1期（2016 / 01 / 01）

36 - 45

英文

Two ISO standard methods for in-stack sampling and measurement of PM_(2.5) and PM_(10) mass concentrations in flue gas from stationary sources were published in 2009 (ISO 23210, conventional cascade impactors) and 2012 (ISO 13271, virtual impactors). The performances of these two methods in terms of PM_(2.5) separation efficiency and the accuracy of measured mass concentration were compared at the same sampling point and conditions both using laboratory-scale model flue gas with different dust concentrations and using real flue gas sampled from a test facility for pulverized coal combustion. The virtual impactor showed very satisfactory performance for PM_(2.5) mass concentration and separation efficiency within the investigated range of mass concentrations and ambient conditions. The conventional cascade impactor method overestimated PM_(2.5) mass concentration by more than 25% due to particle bounce and re-entrainment of coarse particles from the collection plates. During in-stack PM_(2.5) sampling from coal combustion flue gas with reactive components at high temperature, the use of greased plates with the conventional impactor caused overestimation of mass concentration, even when grease with high temperature endurance was used. The use of a quartz-fiber filters on the impaction plates reduced overestimation but particle bounce and re-entrainment still remained.

1. 陳立錚(2016)。利用不同光柵結構探討漸逝波於量子井紅外光偵測器之影響。臺灣大學電子工程學研究所學位論文。2016。1-45。