導入RFID技術於模治具管理之分析與評估

The Analysis and Performance Evaluation on the RFID Technology Introduced to the Mold Management

10.6188/JEB.2010.12(1).05

黃敬仁(Ching-Jen Huang)；廖麗滿(Li-Man Liao)；王世宏(Shih-Hong Wang)

模具 ； 模治具管理 ； 物料管理 ； 無線射頻辨識技術 ； Mold ； Mold Management ； Material Management ； RFID

電子商務學報

12卷1期（2010 / 03 / 01）

183 - 200

繁體中文

產業因為加工製程的需求，會使用各種型式的模具，在實務應用中，常發現要進行加工生產的模具，找下到或取用錯誤，造成訂單生產順序進度落後。RFID是近年來被廣泛應用的技術，藉由其快速辨識能力，能提高資料蒐集效率與正確性，並達到防呆與輔助管理功能。本研究之目的在於應用RFID技術於個案公司倉管部門與生產現場之間模治具的拋轉，分析其導入方法以及導入績效之評估。研究結果顯示，在導入RFID之前所需之人力時間與模擬RFID導入後之人力時間比較，整個流程大約能夠節約百分之六十的人力時間，而且透過RFID系統，有效地避免了人為的疏失，並可以讓生產管理者與現場人員，獲得即時的模治具位置及使用狀態，大大增加了公司作業的整體綜效。

To reach the required order production, many industries need a lot of molds. In practice, however, the order production is often delayed because of the difficulty in finding the right molds to perform the tasks. The RFID technology has the ability to rapidly identify the needed molds; it is, consequently, widely applied in recent years. The RFID technology can also speed up the efficiency of data gathering, improve the correctness of data recognition, and achieve the purposes of management assistance and fool-proofing. This paper is aimed at the application of the RFID technology as a solution for the effectiveness and efficiency of the mold management between the material department and the production management department. The introduced method was analyzed and the performance of the proposed RFID system was evaluated. The research results showed that there was a 60-percent manpower off after the RFID technology was introduced in the mold management process; and that the RFID system effectively reduced the rate of negligence arisen from human error. Furthermore, the production management staff and the manufacturing staff could easily identify the position and status of the molds in a real-time manner. The RFID technology increased the overall synergy of enterprise operation.

1. Angeles, R.(2005).RFID technologies: Supply-chain applications and implementation issues.Information Systems Management,22(1),51-65.
2. Hardgrave, B.(2005).EPC reduces out-of-stocks at Wal-Mart.RFID Journal
3. Demystifying REID: Principles & practicalities
4. Rifidi software
5. Roberti, M.(2005).Wal-Mart Tests REID Data-Sharing Project.RFJD Journal
6. Trappey, A. J. C.,Lu, T. H.,Fu, L. D.(2009).Development of an intelligent agent system for collaborative mold production with RFID technology.Robotics and CIM,25(1),42-56.
7. Tuttle, J. R.(1997).Traditional and emerging technologies and applications in the radio frequency identification (RFID) industry.in Proceeding of IEEE Radio Frequency Integrated Circuits (RFIC) Symposium 1997,Denver, CO, USA:
8. Wang, W. L.,Huang, C. J.,Huang, C. T.(2007).An agent enhanced data collection model for RFID mold management.in Proceeding of 12th International Conference on ISO 9000 & TQM,Taichung, Taiwan:
9. Want, R.(2004).The Magic of RFID.ACM Queue,2(7),40-48.
10. 謝長志(2005)。碩士論文(碩士論文)。國立高雄第一科技大學行銷流通管理研究所。
11. 謝建新、游戰清、張義強、戴青雲(2006)。RFID理論與實務－無線射頻辨識技術。台北市:網奕資訊科技股份有限公司。