生產現場避免捲胴機械危害之探討

Investigation in Avoiding Hazard for Production Field of Reel-Reel Machinery

劉國青(Kuo-Ching Liu)；黃昭萍(Chao-Ping Huang)；沈育霖(Yu-Lin Shen)；康淵(Yuan Kang)；王子彬(Tzu-Ping Wang)

捲胴機械 ； 防止捲夾 ； 本質安全 ； 風險評鑑 ； 危害鑑別 ； 風險估計 ； 風險評估 ； 安全設計 ； Reel-reel Machinery ； Preventing Pinching or Embroiling ； Inherent Safety ； Risk Assessment ； Danger Analysis ； Hazard Identification ； Risk Estimation ； Risk Evaluation ； Safety Design

勞動及職業安全衛生研究季刊

26卷2期（2018 / 06 / 15）

59 - 75

繁體中文

最近幾十年來幾乎每年都發生捲胴機器捲人致死的職災，大部分的老闆和管理者面對的問題是既有的設備或是已採購驗收的設備，如何降低風險，避免生產現場的設備發生危害。因此本文探討生產現場避免自動化捲胴機械危害的安全措施，本文的研究途徑如後所敘的項目，依序進行：1.文獻探討；2.從職災案例的事故分析，探討捲胴機械生產設備之危害；3.現場訪視，探討其生產現場存在的危險；4.比較國際標準；探討本國現有標準及法令；以及5.探討有關捲胴式機器風險評鑑及降低風險的案例，根據本文以上研究內容所得結果，綜合分析，提出自動化捲胴機械生產現場防止危害的初步評議。

Since the last several ten years fatal accidents have occurred in production fields of reel-reel machinery every year. Therefore, this paper explores the inherent safety of the reel manufacturing equipment. This paper approaches sequentially by: 1. references surrey; 2. case study and accident analysis for occupational hazards of equipment and production fields; 3. on-site visiting to explore the dangers and safety precautions of their equipment and manufacturing systems; 4. the comparison in international standards to explore the existing national standards and ordinances; and 5. study in risk assessment and reducing from technical report for the reel-reel machinery of a manufacturing factory. According to the results of the comprehensive analysis of the above research contents, this paper proposed the preliminary comments on the inherent safety of the automatic reel-reel machine.

1. (1996).EN 547: Safety of machinery - Human body measurements.
2. (2010).ISO 12100: Safety of machinery-Gereral Principles for Design-Risk Assessment and Risk Redaction.ISO.
3. (2006).ISO 13850: Safety of machinery-Emergency stop - Principles for design.ISO.
4. (2010).ISO 13855: Safety of machinery-Positioning of protective safeguards with respect to the approach speeds of parts of the human body.ISO.
5. (2008).ISO 13857：Safety of machinery-Safety distances to prevent hazard zones being reached by upper and lower limbs.ISO.
6. (2007).ISO 14121-2: Safety of Machinery-Risk Assessment-Part 2 : Practical guidance and examples of methods.ISO.
7. CNS 14804：機械安全－緊急停止－設計原則。CNS；2004。
8. CNS 15344：機械安全－防護裝置之聯鎖裝備-設計與選擇原則。CNS；2010。
9. CNS草制1050445：控制系統安全相關部分－第一部：一般設計原計。
10. (2006).ISO 13849-1: Safety of machinery-safety related parts of control systems-Part 1: General principles for design.ISO.
11. (2007).ISO 14121-1: Safety of Machinery-Risk Assessment- Part 1 Principles.ISO.
12. (2009).ISO 31010: Risk Management-Risk Assessment Techniques.ISO.
13. CNS 15434：機械安全－防護裝置－設計與建構固定式和移動式防護裝置之一般要求。CNS；2011。
14. 職業安全衛生設施規則。中華民國法規。
15. (2010)。某公司捲胴機器機械安全技術文件。Global OS&H Machinery Safety；2010。
16. Okada, M,Toyama, S(2013).A study for the influence of human behavior on a safety marking of electrical machines.Journal of Vibroengineering,15,72-76.
17. Okada, M,Toyama, S(2011).A study for safety design of electrical machines considering human behavior.Journal of Vibroengineering,13,792-98.
18. Trevor, K(1991).Inherently safer plants, an update.Plant Operations Progress,10,18-26.
19. 勞動部勞動及職業安全衛生研究所。職災統計資料庫：http://www.osha.gov.tw/cht/index.php
20. 勞動部勞動及職業安全衛生署。職災案例宣導資料https://www.osha.gov.tw/1106/1196 /10141/?CatType=10157
21. 趙廷弟(2011)。安全性設計分析與驗證。北京市:國防工業出版社。