The Vibration Behavior of Flexibly Fixed Rotating Machines

10.6567/IFToMM.14TH.WC.OS14.023

H. Fujiwara；H. Nakaura；K. Watanabei

Rotating machines ； Condition monitoring ； Flexible supported base

Proceedings of the 14th IFToMM World Congress

14th-4（2015 / 11 / 04）

517 - 522

英文

Needless to say, various rotational machines support today's industry. It follows that maintenance of these machines is very important to ensure their performance. ISO 10816 series (Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts -) is widely applied to various rotational machines (motors, pumps, etc.). In this standard, we judge velocity amplitude of machine vibrations corresponding to the size of the machine while the machine is fixed on the ground and driven. However, if the operational situation prevents rigid fixation of a machine to the ground, the machine is fixed flexibly. As a result, the machine vibration is of higher amplitude than that of a machine that is rigidly fixed, and application of the existing evaluation standard becomes difficult. Therefore, the evaluation standard is relaxed for some machines. The purpose of this study is a proposal of new precise evaluation method which is considered for stiffness and damping of a flexible support base that contains springs or rubber sheets. In this paper we prepare an experimental system of one disk rotor that is supported by ball bearings at both ends, and compare vibration with a flexible support base and that with a rigid support base, by simulation and experiment.

1. 周致學(2017)。大型雙足機器人之外力干擾回復平衡控制。淡江大學電機工程學系碩士班學位論文。2017。1-75。 
2. 卓育賢(2011)。可摻雜之電活性聚亞醯胺薄膜、微米球及奈米纖維之製備與性質探討。中原大學化學系學位論文。2011。1-229。 
3. 侯天祐(2017)。人形機器人的虛擬阻抗控制與零空間動作控制。國立臺灣大學機械工程學系學位論文。2017。1-68。 
4. 張志豪(2017)。竹嵌紋病毒衛星核酸在植物體之長距離移動。臺灣大學植物科學研究所學位論文。2017。1-116。