题名

離子溶液為模版製備之中孔洞二氧化矽氣凝膠(A-SiO2)之應用 1.以PAN/A-SiO2複合高分子電解質(CPEs)製備高電容量鋰電池 2.高效能A-SiO2防曬材料之製備和性質

并列篇名

Application of Mesoporous Silica Aerogel Prepared with Ionic Liquid Template 1.PAN/A-SiO2 CPEs for High Capacity Lithium Battery 2.High Efficiency Sunscreen Encapsulated Silica

DOI

10.6840/cycu201100455

作者

陳羿廷

关键词

氣凝膠 ； 二氧化矽 ； 鋰電池 ； 防曬劑 ； Aerogel ； Silica ； Lithium Battery ； Sunscreen

期刊名称

中原大學化學系學位論文

卷期/出版年月

2011年

学位类别

博士
导师

陳玉惠
内容语文

繁體中文
中文摘要

摘要 1.以PAN/A-SiO2複合高分子電解質(CPEs)製備高電容量鋰電池 本論文主要探討中孔洞材料在複合高分子電解質中的影響及鋰電池之應用。因此在本研究中製備一系列以PAN (polyacrylonitrile) 為主體的複合高分子電解質，並探討中孔洞材料的添加對PAN高分子電解質的影響。由離子導電度測試的結果，得知本研究所製備的複合高分子電解質在添加3% Aerogel (A-SiO2)、3% MCM-41 ( M-SiO2)和4% Degussa SiO2 (D-SiO2)及F＝0.6 LiClO4組成下，30℃時之導電度分別可達6.0×10-4 S/cm、4.5×10-4 S/cm和2.3×10-4 S/cm，此導電度在固態高分子電解質中已達可應用範圍。經紅外線光譜儀（FT-IR）、固態核磁共振光譜（Solid-state NMR）等測試所製備之複合高分子電解質中各成分間作用力。此外，利用線性掃瞄伏安法(linear sweep voltammetry, LSV)和循環伏安法(cyclic voltammetry, CV)探討高分子電解質的電化學穩定性。由結果顯示，本研究所製備的高分子電解質有不錯的電化學穩定性與高氧化破壞電壓(4.5V vs. Li/Li+)，並且與鋰金屬之間有好的相容性。其中以A-SiO2所製備之固態高分子電解質，在0.5C/0.5C充放電條件下測試，經過20次循環測試後仍有100％的放電電容量，顯示具有不錯的充放電結果，預期將可進一步進行相關充放電條件測試，並應用在鋰高分子電池。 2. 高效能A-SiO2防曬材料之製備和性質 根據過去的研究指出，防曬化妝品中常用的有機防曬劑大都是光不穩定性的物質，經由紫外線照射後會產生對皮膚有害之物質，因此本次研究利用多孔性SiO2進行MCX或EHS防曬劑的包覆，並以離子熔液為模板進行in-situ方式進行sol-gel反應，以便得到SiO2-MCX或SiO2-EHS防曬劑。經由BET、FT-IR、TGA、NMR、UV/Vis及SPF測試儀的鑑定，結果證實反應過程確實成功地將MCX或EHS包覆於多孔性的SiO2中。所獲得之包覆性防曬劑SiO2-MCX及SiO2-EHS，其包覆量分別為60wt％和55wt％。經測試亦證實SiO2-MCX防曬乳液的防曬係數比未包覆的MCX的高出許多，即MCX因包覆於SiO2中其防曬效果明顯提高。
英文摘要

Abstract 1. PAN/A-SiO2 CPEs for High Capacity Lithium Battery The objective of this study is to investigate the effect of morphology of SiO2 filler on the PAN-based composite polymer electrolytes (CPE). Hence, a series of composite polymer electrolytes based on PAN were prepared and the effect of addition of the SiO2 fillers, including the mesoporous silica aerogel (A-SiO2)、mesoporous MCM-41 silica (M-SiO2) and a nonporous commercial silica (D-SiO2), on the composite polymer electrolytes was discussed. The best conductivities obtained at room temperature is 6.0×10-4 S/cm, 4.5×10-4 S/cm and 2.3×10-4 S/cm for the CPE with 3wt% A-SiO2, 3wt% M-SiO2 and 4wt% D-SiO2, respectively. The interactions among the components of the electrolytes were also analyzed by the results of FT-IR and solid state Li NMR spectra. Furthermore, the electrochemical stability of the composite polymer electrolytes was studied by linear sweep voltammetry and cyclic voltammetry analyses. The above results revealed that the as-prepared polymer electrolytes prepared have good electrochemical stability, high oxidation breakdown voltage (4.5V vs. Li/Li+) and good compatibility with the lithium metal electrode. The capacity of the cell fabricated with the composite polymer electrolyte based on PAN/LiClO4/A-SiO2 measured with 0.5C of charge-discharge rate is 121mAh/g. It was also found that after twenty times charges-discharges, the capacity of the cell still remained 100%. The result indicates that the composite electrolyte prepared is a potential candidate as a solid electrolyte for secondary lithium battery. 2. High Efficiency Sunscreen Encapsulated Silica In this study the sun-screening material, octyl methoxycinnamate (MCX) or Octyl salicylate (EHS), was encapsulated by a mesoporous silica aerogel to enhance the screening effect and stability to prevent skin damages caused by ultraviolet. The encapsulated SiO2-MCX was prepared by in-situ sol-gel polymerization of tetraethyl orthosilicate (TEOS) and MCX with an ionic liquid as the template as well as the solvent. The as-prepared SiO2-MCX was characterized by Brunauer–Emmett–Teller (BET), Fourier transformation infrared (FT-IR), thermo¬gravimetric analysis (TGA), s solid state 29Si NMR, UV-Visible Spectrophotometer, and SPF-290S analyzer. The results indicated that the SiO2-MCX and SiO2-EHS particles are mesoporous material with high surface area and pore volume and about 60wt％ of MCX and 55wt % of EHS was encapsulated in the mesopores of the SiO2 framework, respectivley. It was also found that the UV absorption value of the as-prepared SiO2-MCX and SPF of the as-prepared SiO2-MCX containing sun-screening lotion were much higher than that of the corresponding pure MCX material and lotion.
主题分类 基礎與應用科學 > 化學
理學院 > 化學系
参考文献
  1. 5. Y. Matsuda, “Stable Electrolytes for Lithium Batteries”, J. Power Source, 20 (1987)19
    連結：
  2. 6. Y. Matsuda, M. Merita and K.Kosaka, J. Electrochem. Soc., 130 (1983)10
    連結：
  3. 10. M. Alamgir and K. M. Abraham, “Lithium Batteries New Materials, Developments and Perspectives, Edited by G. Pistoia, Elservier Science, chap3 (1994)
    連結：
  4. 11. H. Hung, Electrochim Acta, 37 (1992)1671
    連結：
  5. 12. S. Hossian, in Handbook of Batteries, Edited by D. Linden, McGraw-Hill, New York, Chap. 36 (1995)
    連結：
  6. 13. K. M. Abraham “Application of Electroactive Polymers”, Edited by B. Scrosati, Chaptan  Hall, London, Chap.3, （1993）
    連結：
  7. 14. M. Watanabe and N. Ogata, “Ionic Conductivity of Polymer Electrolytes and Future Applications” Br. Polym. J., 20,(1988)181
    連結：
  8. 16. J. M. Chabgno, Thesis, University of Grenoble, 1980, B. L. Papke, Ph.D. Thesis, Northwestern University, (1982)
    連結：
  9. 18. P. V. Wright, Br. Polym. J., 7( 1975) 319.
    連結：
  10. 19. G. Feullade, P. Perche, J. Appl. Electrochem., 5(1975) 63.
    連結：
  11. 23. J. E. Weston, B. C. H. Steele, Solid State Ionics, 7(1982)75.
    連結：
  12. 25. K. Murata, S. Izuchi, Y. Yoshihisa, Electrochim. Acta, 45(2000) 1501.
    連結：
  13. 28. F. M. Gray, Solid Polymer Electrolytes , VCH, New York, Chap.2 p.4 (1991)
    連結：
  14. 30. K. M. Abraham “Application of Electroactive Polymers”, Edited by B. Scrosati, Chaptan  Hall, London, Chap.3, （1993）
    連結：
  15. 31. M. C. Wintersgill and J. J. Fontanella, ”Polymer Electrolyte Review-2”, Edited by J. R. MacCallum and C. A. Vincent, Elseriver Applied Science Publisher LTD, London, Chap.2 (1989)
    連結：
  16. 32. C. W. Walker, Jr. and M. Salomon,” Improvement of Ionic Conductivity in Plasticized PEO-Based Solid Polymer electrolytes” J. Electrochrm. Soc., 140(1993)3409
    連結：
  17. 33. I. Oslen, R. Koksbang, E. Shou, Electrochim Acta , 40 (1995) 1701
    連結：
  18. 34. G. Persen, P. Jacobsson, L. M. Torell, Electrochim Acta, 37(1992)1495
    連結：
  19. 35. C. Berthier, W. Gorecki, M. Minier, “Microsopic Investigation of Ionic Conductivity in Alkali: Metal Salts-poly (ethylene oxide) Adducts”, Solid State Ionics, 11(1983) 91
    連結：
  20. 36. 鄭宗田,張憲彰,溫添進,”固態高分子電解質之研發與應用”, 化學, 第35卷, 第四期, 84年10月, 359頁
    連結：
  21. 37. G. Feullade, P. Perche, J. Appl. Electrochem., 5(1975)63
    連結：
  22. 39. K. M. Abraham, M. Alamgir, Chem. Mater., 3 (1991)339
    連結：
  23. 41. K. M. Abraham, M. Alamgir, J. Power Sources, 43-44 (1993)195
    連結：
  24. 48. R. Koksbang, I. I. Olsen and D. Shackle, ”Review of Hybrid Polymer Electrolytes and Rechargeable Lithium Batteries”, Solid State Ionics, 169 (1994) 320
    連結：
  25. 49. T. Noda, S. Kato, Y. Yoshihisa, K. Takeuchi and K. Murata, J. Power Sources, 43-44 (1993)89
    連結：
  26. 50. K. M. Abraham, M. Alamgir, J. Electrochem. Soc., 136(1990)1657
    連結：
  27. 51. T. Nagatomo, C. Ichikawa, O. Omato, J. Electrochem. Soc.,134(1987) 305
    連結：
  28. 52. D. Peramunage, D. M. Pasquariello, K. M. Abraham, J. Electrochem. Soc., 142 (1995) 1789
    連結：
  29. 53. M. Alamgir, K. M. Abraham, J. Electrochem. Soc., 140 (1993)L96
    連結：
  30. 57. L. Z. Fan, C. W. Nan., S. J. Zhao, Solid State Ionics, 164 2003 81.
    連結：
  31. 58. J. W. Kim, K. S. Ji, J. P. Lee, J. W. Park, J. Power Sources, 119/121(2003)415.
    連結：
  32. 59. K. S. Ji, H. S. Moon, J. W. Kim, J. W. Park, J. Power Sources, 117(2003)124.
    連結：
  33. 61. M. Nookala, B. Kumar, S. Rodrigues, J. Power Sources, 111(2002) 165.
    連結：
  34. 62. Thomas K.-J. Köster, Leo van Wüllen, Solid State Ionics 181 (2010) 489–495
    連結：
  35. 63. M. Y. A. Rahman,A. Ahmad, L. H. C. Ismail, M. M. Salleh, Journal ofAppliedPolymer Science, 115 (2010) 2144–2148
    連結：
  36. 64. H. M. Xiong, X. Zhao, J. S. Chen, J. Phys. Chem. B, 105(2001) 10169.
    連結：
  37. 69. Soo-Kyeong Jeong, Yu-Jin Lee, Nam-Ju Jo, Macromol. Symp., 249–250(2007) 167–173
    連結：
  38. 70. H. M. Kao, C. L. Chen, Angew. Chem. Int. Ed., 43(2004)980.
    連結：
  39. 71. J. Y. Xi, X. Z. Tang, Chem. Phys. Lett., 400(2004)68.
    連結：
  40. 73. R. L. Karlinsey, L. M. Bronstein, J. W. Zwanziger, J. Phys. Chem. B, 108(2004) 918.
    連結：
  41. 74. J. Xi, X. Tang, Electrochim. Acta, 50(2005)5293.
    連結：
  42. 76. H. M. Kao, S. W. Chao, P. C. Chang, Macromolecules, 39(2006) 1029.
    連結：
  43. 82. J. Y. Xi, X. P. Qiu, X. M. Ma, M. Z. Cui, J. Yang, X. Z. Tang, W. T. Zhu, L. Q. Chen, Solid State Ionics,176(2005)1249.
    連結：
  44. 83. M. J. Reddy, P. P. Chu, J. Power Sources,135(2004)1.
    連結：
  45. 85. J. Xia, X. Qiua, W. Zhua, X. Tang, Microporous and Mesoporous Materials, 88(2006)1.
    連結：
  46. 88. F. Croce, L. Persi, B. Scrosati, J. Electrochem. Soc., 147(2000)1718.
    連結：
  47. 89. S. H. Chung, Y. Wang, L. Persi, F. Croce, S. G. Greenbaum, B. Scrosati, E. Plichta, J. Power Sources, 97-98(2001)644.
    連結：
  48. 91. M. Marcinek, A. Bac, P. Lipka, A. Zalewska, G. Zukowska, R. Borkowska, W. Wieczorek, J. Phys. Chem. B, 104(2000)11088.
    連結：
  49. 97. K. M. Abraham and M. Alamgir, Solid State Ionics, 70 (1994) 20
    連結：
  50. 100. C. D. Robitalle and D. Fauteux, J. Electrochem. Soc., 133(1985)
    連結：
  51. 103. S. Suttiruengwong, Der Technischen Fakultät der Universität
    連結：
  52. 105. M. Schmidt, F. Schwertfeger, J. non-cryst. solids, 225(1998)364.
    連結：
  53. 106. F. Schwertfeger, D. Frank, M. Schmidt, J. non-cryst. solids,
    連結：
  54. 108. L.W. Hrubesh, J. Non-Cryst Solids. 225(1998) 335.
    連結：
  55. 109. J.S. Wilkes, M.J. Zaworotko, J. Chem. Soc. Chem. Comm., (1992) 965
    連結：
  56. 110. C.L. Hussey, Room temperature molten salt systems, in: G.Mamantov (Ed.),
    連結：
  57. Advances in Molten Salt Chemistry, vol. 5,Elsevier, New York, (1983) 185.
    連結：
  58. Polyhedron, 15(7) (1996) 1217.
    連結：
  59. 112. G. H. Hsiue, Y. L. Liu, H. H. Liao, J. Appl. Polym. Sci., 39
    連結：
  60. 113. C. L. Chiang, C. C. M. Ma, Eur. Polym. J., 38 (2002) 2219.
    連結：
  61. 114. S. J. Gregg, K. S. W. Sing, Adsorptionm, surface area and
    連結：
  62. 115. S. A. Davis, S. L. Burkett, N. H. Mendelson, S. Mann, Nature,
    連結：
  63. Colloid. Interf. 33 (1990) 91.。
    連結：
  64. Pierotti, J. Rouquerol, T. Siemieniewska, Pure Appl. Chem., 57(4) (1985)603.
    連結：
  65. Papirer, Adv. Colloid. Interf. 33 (1990) 91
    連結：
  66. Ionics, 150 (2002)327
    連結：
  67. Abraham, Chem. Mater., 9(1997)369
    連結：
  68. 122. Z. Wang, Y. Hu, Li. Chen, J. Power Sources, 146 (2005) 51
    連結：
  69. 2. Health, solar UV radiation and environmental change, WHO, International Agency for Research on Cancer, Lyon, 1993.
    連結：
  70. 4. 蔡季真, 油脂與乳化劑型對防曬產品的SPF值之影響(2005)
    連結：
  71. 9. A. Varvaresou, Journal of Cosmetic Dermatology, 5(1)(2006) 53.
    連結：
  72. 10. Fergal J. Moloney, Sinead Collins and Gillian M. Murphy, American Journal of Clinical Dermatology, 3 (2002)186.
    連結：
  73. 11. Peterlee, Radiation Protection Dosimetry, 91(2000) 271.
    連結：
  74. 12. A.B.G. Lansdown, A. Taylor, International Journal of Cosmetic Science, 19 (1997)167.
    連結：
  75. 18. M. Pissavini, L. Ferrero, V. Alard, U. Heinrich, H. Tronnier,D.Kockott, D. Lutz,V. Tournier, M. Zambonin, M. Meloni, Cosmetics & Toiletries, 118 (10) (2003) 63.
    連結：
  76. Esthethetic Science). 20-26
    連結：
  77. 20. S.A. Wissing, R.H. Mu¨ ller, Int. J. Pharm., 242 (2002) 373.
    連結：
  78. 22. S. Scalia, A. Molinari, A. Casolari, Eur. J. Pharm. Sci., 22 (2004) 241.
    連結：
  79. 23. S. Scalia, R. Tursilli, V. Iannuccelli, J. Pharm. Biomed. Analy., 44 (2007)29
    連結：
  80. 26. H.H. Tonnesen. Int. J. Pharm., 225(2001)1.
    連結：
  81. 28. 吳威毅、蔡福裕，中孔洞二氧化矽材料擔附鈀金屬錯合物對於有機催化反應之研究；化學季刊，2008年，第66卷，第2期，第117頁。
    連結：
  82. 31. I. Matsuyama, S. Satoh, M. Katsumoto and K. Susa, J. Non-Cryst. Solids, 135 (1991) 22.
    連結：
  83. 32. C. J. Brinker, American Chemical Society, Scherer, Sol-Gel-Science chap3, (1994) 361.
    連結：
  84. 34. C. L. Chiang, C. C. M. Ma, Eur. Polym. J., 38(2002) 2219.
    連結：
  85. 35. S. J. Gregg, K. S. W. Sing, Adsorptionm, surface area and porosity 2nd Ed., Academic press, New York, NY, (1982).
    連結：
  86. 1. 溫添進,科學發展月刊第29卷第7期2001年3月498頁
  87. 2. 陳金銘,工業材料267 期2009年03月60頁
  88. 3. 劉如熹, CHEMISTRY(The Chinese Chem. Soc., Taipei), 1999, 57, 149.
  89. 4. 工業材料197期2002年5月118頁
  90. 7. F. Croce, F. Gerace, G. Dautzemberg, S. passerini, G. B. Appetechi and B. Scrosati, Electrochim Acta, 39 (1994)2187
  91. 8. 陳憲偉,”高分子/黏土/鋰金屬鹽所組成之奈米級高分子電解質複合材料之研究”2002年5月5頁
  92. 9. J. Y. Song, Y. Y. Wang, C. C. Wan, J. Power Sources, 77, (1999)183-197
  93. 15. D.F. Shriver, B. L. Papke, M. A. Ratner, R. Dupon, T. Wang and M. Brodwin, Solid State Ionic, 5(1981)83
  94. 17. D. E. Fenton, J. M. Parker, P. V. Wright, Polymer, 1973, 14, 589.
  95. 20. M. B. Armand, “Second International Meeting on Solid Electrolytes Extended Abstracts” , St. Andrews Ecosse, 1978.
  96. 21. M. B. Armand, “Fast Ion Transport in Solids” , P. Vashishta, Editor, North Holland, New York, 1979.
  97. 22. R. Dupon, B. L. Papke, M. A. Ratner, D. H. Whitmore, D. F. Shriver, J. Am. Chem. Soc., 104(1982)6247.
  98. 24. C. Berthier, W. Gorecki, M. Minier, M. B. Armand, J. M. Chabagno, P. Rigaud, Solid State Ionics, 1191983)91.
  99. 26. H. B. Armand, S. M. Chabagno, M. Duclot, in: Second International Meeting on Solid Electrolytes, St. Andrews, Scotland, Extended Abstracts, 20-22 Sept., (1978)
  100. 27. M. B. Armand, in: J. R. MacCallum, C. A. Vincent(Eds.), polymer Electrolyte Reviews-, Elservier, London, Chap1, p.1 (1987)
  101. 29. M. Armand, W. Gorecki, R. Andreani, in: B. Scrosati(Ed.), Proceedings in the second International Meeting on Polymer Electrolytes, Elseriver, New York, p91 (1990)
  102. 38. F. B. Dias, Lambertus Plomp, Jakobert B. J. Veldhuis, J. Power Sources, 88 (2000)169
  103. 40. J. L. Bennett, A. A. Dembek and H. R. Allcock, Chem. Mater., 1 (1989)14
  104. 42. M. Blonsky, D. F. Shriver, P. Austin and H. R. Allcock, J. Am. Chem. Soc., 106 (1984) 6854
  105. 43. M. B. Armand, in: J. R. MacCallum, C. A. Vincent(Eds.), polymer Electrolyte Reviews-, Elservier, London, Chap2, p.23 (1987)
  106. 44. M. Watanabe, K. Sanui, N. Ogata, F. Ionue, T. Kobayashi and Z. Chtaki, Polymer J., 17(1985)549
  107. 45. I. E. Kelly, J. R. Owen and B. C. H. Steele, J. Power Sources, 14(1985) 13
  108. 46. Y. Matsuda, M. Morita and H. Tsutsumi, J. Power Sources, 43-44 (1993)439
  109. 47. W. Wieczrek, K. Such, Z. Florjanczyk and J. R. Stevens, Phys. Chem., 98 (1994)6840
  110. 54. H. S. Choe, J. Giaccai, M. Alamgir, K. M. Abraham, Electrochim Acta, 40, 13-14 (1995)2289
  111. 55. R. Xue, H. Hung, M. Menetrier and L. Chen, J. Power Sources, 43-44 (1993)431
  112. 56. 蔡克群, 工業材料, 146期88年2月127-157頁
  113. 60. M. A. K. L. Dissanayake, P. A. R. D. Jayathilaka, R. S. P. Bokalawala, I. Albinsson, B. E. Mellander, J. Power Sources, 119/121(2003)409.
  114. 65. A. D’epifanio, F. S. Fiory, S. Licoccia, E. Traversa, B. Scrosati, F. Groce, J. Appl. Elctrochem., , 34(2004)403
  115. 66. J. Y. Xi, X. Z. Tang, Chem. Phys. Lett., 393(2004) 271.
  116. 67. A. L. SHARMA, NAMRATA SHUKLA, AWALENDRA K. THAKUR, Journal of Polymer Science: Part B: Polymer Physics, 46(2008)2577–2592
  117. 68. Awalendra K. Thakur , Dillip K. Pradhan, B.K. Samantaray, R.N.P. Choudhary, Journal of Power Sources 159 (2006) 272–276
  118. 72. L. M. Bronstein, E. Ashcraft, P. DeSanto, Jr., R. L. Karlinsey, J. W. Zwanziger, J. Phys. Chem. B, 108(2004)5851.
  119. 75. L. M. Bronsteina, R. L. Karlinseya, B. Steinb, J. W. Zwanziger, Solid State Ionics, 176(2005)559.
  120. 77. C. W. Nan, L. Fan, Y. Lin, Q. Cai, Phys. Rev. Lett., 91(2003) 266104-1.
  121. 78. P. P. Chu, M. J. Reddy, H. M. Kao, Solid State Ionics, 156(2003) 141.
  122. 79. H. M. Kao, Y. Y. Tsai, S. W. Chao, Solid State Ionics,176(2005)1261.
  123. 80. Y. Tominaga, S. Igawa, S. Asai, M. Sumita, Electrochim. Acta, 50(2005)3949.
  124. 81. Y. Tominaga, S. Asai, M. Sumita, S. Panero, B. Scrosati, Electrochem. Solid-State Lett., 8(2005) 22.
  125. 84. Y. Tominaga, S. Asai, M. Sumita, S. Panero, B. Scrosati, J. Power Sources, 146(2005)402.
  126. 86. J. Xi, S. Miao, X. Tang, Macromolecules, 37(2004)8592.
  127. 87. J. Xi, Y. Bai, X. Qiu, W. Zhu, L. Chen, X. Tang, New J. Chem., 29(2005)1454.
  128. 90. P.A.R.D. Jayathilaka, M.A.K.L. Dissanayake, I. Albinsson, B. E. Mellander, Elctrochim. Acta. 47(2002)3257.
  129. 92. C. R. Yang, J. T. Perng, Y. Y. Wang, C. C. Wan, J. Power Sources, 62 (1996)89-93
  130. 93. O. Bohnke, C. Rousselet, P. A. Gillet and C. Truche, J. Electrochem. Soc., 139 (1992) 1862-1865
  131. 94. F. Croce, S. D. Brown, S. G. Greenbaum, S. M. Slane and M. Salomon, Chem. Mater., 5(1993)1268-1272
  132. 95. P. E. Stallworth, J. Li, S. G. Greenbaum, F. Croce, S. Slane, Solid State Ionics, 73(1994)119-126
  133. 96. P. E. Stallworth, J. Li, S. G. Greenbaum, F. Croce, S. Slane and M. Salomon, Electrochim Acta, 40(1995) 2137
  134. 98. Zhaoxiang Wang , Yongsheng Hu, Liquan Chen,Journal of Power Sources 146 (2005) 51–57
  135. 99. M. B. Armand, J. M. Chabagno, and M. J. Duclot, P. Uashishta, J. N. Mundy, and G. K. Shenoy Editors , North Holland New York(1979) 131
  136. 315
  137. 101. P. R. Sorensen and T. Jacobsen, Polymer Bull, 9(1983)47
  138. 102. E. I. Ko, Chemtech, 23(1993)31.
  139. Erlangen-Nürnberg, DOKTOR-INGENIEUR, 2005.
  140. 104. Z. Deng, J. Wang, A. Wu, J. Shen, B. Zhou, J. non-cryst. solids,
  141. 225(1998)101.
  142. 225(1998)24.
  143. 107. 王天路, 郭德文, 化工資訊, 2002, 8, 66.
  144. 111. P.A.Z. Suarez, J.E.L. Dullius, S.R. Einloft, D.E. Souza, J. Dupont,
  145. (2001) 986.
  146. porosity 2nd Ed., Academic press, New York, NY, (1982).
  147. 385(1997) 420.
  148. 116. A.P. Legrand, H. Hommel, A. Tuel, A. Vidal, H. Balard, E. Papirer, Adv.
  149. 117. K.S.W. Sing, D.H. Everett, R.A.W. Haul, L. Moscou, R.A.
  150. 118. J.W. Gilman, C.L. Jackson, A.B. Morgan and R.H. Jr, Chem.
  151. Mater, 12(2000)1866
  152. 119. A.P. Legrand, H. Hommel, A. Tuel, A. Vidal, H. Balard, E.
  153. 120. Y.W. Chen-Yang, H.C. Chen, F.J. Lin, C.C. Chen, Solid State
  154. 121. H. S. Choe, B. G. Carroll, D. M. Oasquariello, and K. M.
  155. 參考文獻
  156. 1. 蘇恒璋,防曬成份在乳化化粧品之效能探討,2006
  157. 3. F. Urbach, Journal of Photochemistry and Photobiology B, Biology, 64(2-3)( 2001)99.
  158. 5. 馮欽賜、楊明仁，紫外線指數的分析與預報，氣象學報， 43 (1) (1999) 11-26.
  159. 6. 李秀蓮，紫外線全面防禦對策，健康世界，260 (1997) 115-117.
  160. 7. 劉銘龍、柳中明、黃韋菁，揭開紫外線的奧秘，台灣地球日出版社，1998.
  161. 8. Ronni Wolf, Binnur Tüzün, Yalcin Tüzün, Dermatologic Therapy, 146(4) (2002)659.
  162. 13. 張慧柔，新防曬係數的應用，行政院國家科學委員會專題研究計畫成果報告，2003.
  163. 14. Food and Drug Administration, “Sunscreen Drug Products For Over-The-Counter Human Use； Final Monograph”, Vol. 64, Nov 1998.
  164. 15. 洪偉章、陳榮秀，化妝品科技槪論，二版，台灣台北：高立圖書有限公司，pp.18-23, 2002。
  165. 16. 蔡禎輝、劉銘龍、柳中明，抗紫外線產品測試及檢測標準比較分析，1998 年紫外線研討會論文集，(1998) 115-129.
  166. 17. 廖俊亨、胡俊弘、吳珍瑗、林宮華、黃明權、張柏林、許明照，化妝品防曬係數測定法之研究，行政院衛生署八十八年度自行研究計畫研究報告，1999.
  167. 19. 李佳晉,載體在防曬化妝品之應用--美容科技學刊(The Journal of internation
  168. 21. M.M. Jiménez, J. Pelletier, M.F. Bobin, M.C. Martini, Int. J. Pharm., 272(2004)45.
  169. 24. L. Perioli, V. Ambrogi, B. Bertini, M. Ricci, M. Nocchetti, L. Latterini, C. Rossi, Eur. J. Pharm. Biopharm., 62 (2006)185.
  170. 25. W. Sun, Q. He, Y. Luo, Materials Letters, 61(2007)1881.
  171. 27. V. Ambrogi, L. Perioli, F. Marmottini, L. Latterini, C. Rossi, U. Costantino. Journal of Physics and Chemistry of Solids, 68 (2007) 1173.
  172. 29. 蔡金津 (民90)。 奈米顆粒及薄膜之溶膠-凝膠技術。 化工資訊。 十一月， 16-21。
  173. 30. 陳慧英，黃定加，朱秦億(民88)。 溶膠凝膠法在薄膜製備上之應用。 化工技術。第七卷，第十一期，152-167。
  174. 33. G. H. Hsiue, Y. L. Liu, H. H. Liao, J. Appl. Polym. Sci., 39(2001) 986.
  175. 36. S. A. Davis, S. L. Burkett, N. H. Mendelson, S. Mann, Nature, 385 (1997) 420.
  176. 37. 袁敬堯，博士論文，中原大學化學所，2002年。
  177. 38. K.S.W. Sing, D.H. Everett, R.A.W. Haul, L. Moscou, R.A. Pierotti, J. Rouquerol, T. Siemieniewska, Pure Appl. Chem., 57(4) (1985) 603.
print cancel