乾式清洗機機電系統設計及性能探討

An Investigate in Design and Performance of Electromechanical system for Dry Cleaner

蔣旭堂(Shiu-Tang Jiang)；鄭筵諭(Yan-Yu Zheng)；祝楷博(Kai-Po Jhu)

乾式清洗機 ； 機電系統 ； dry cleaner ； electromechanical system

先進工程學刊

14卷2期（2019 / 10 / 01）

85 - 91

繁體中文

本文是探討乾式清洗機系統的設計及性能，包括乾式清洗機管路、分流管、鼓風機及其電控系統、過濾系統及其過濾網之選用及安裝等。乾式清洗機系統中有分為兩種，第一種是單純使用流量來進行清洗，而第二種使用壓力讓出口到達高頻氣流來進行清洗兩種，而本文選用的是第二種乾式清洗機來做為系統中的清洗機。電控設計是以變頻及外部控制為設計基礎，對鼓風機進行變頻控制來控制流量及壓力，使出口壓達到14~28kPa來進行清洗，測試結果使用50Hz出口壓力可以達到15kPa，70Hz出口壓力可以達到26kPa。

This article explores the design and performance of dry cleaning system, including dry cleaning machine piping, shunt tubes, blowers and their electronic control systems, filtration systems and their filter selection and installation. There are two types of dry cleaning system. The first one is simply using flow to clean, and the second is using pressure to allow the outlet to reach high frequency airflow for cleaning. In this paper, the second dry cleaning is used. The machine is used as a washing machine in the system. The electronic control design is based on frequency conversion and external control. The air blower is controlled by frequency conversion to control the flow and pressure, and the outlet pressure reaches 14~28kPa for cleaning. The test result can reach 15kPa with 50Hz outlet pressure, and the 70Hz outlet pressure can reach 26kPa.

1. Chiu, Chi-Cheng,Chang, Chih-Hao,Lee, Yung-Chun(2010).Ultrasound Assisted Laser Machining and Surface Cleaning.Proceedings of the 2010 5th IEEE
2. Hauptmann, M,Struyf, H,Mertens, P,Heyns, M,De Gendt, S,Glorieux, C,Brems, S(2012).Bubble size distribution analysis and control in high frequency ultrasonic cleaning processes.IOP Conference Series: Materials Science and Engineering
3. Kanaoka, Chikao(2019).Fine Particle Filtration Technology Using Fiber as Dust Collection Medium.KONA Powder and Particle Journal,36,88-113.
4. Kima, T.-G.,Hub, S.,Busnainab, A. A.,Parka, J.-G.(2007).Effect of Particle Deposition and Wet/Dry Cleaning Methods on Particle Removal Efficiency.ECS Transactions,11(2),361-367.
5. Kimmer, Dusan,Vincent, Ivo,Kovarova, Miroslava,Lovecka, Lenka(2019).Nanostructures for Air Filtration. Filtration Properties in Range of Maximum Penetrating Particle Sizes.AIP Conference Proceedings 2017
6. Lamminen, Mikko O.,Walker, Harold W.,Weavers, Linda K.(2004).Mechanisms and factors influencing the ultrasonic cleaning of particle-fouled ceramic membranes.Journal of Membrane Science,237,213-223.
7. Lee, Judy,Ashokkumar, Muthupandian,Yasui, Kyuichi,Tuziuti, Toru,Kozuka, Teruyuki,Towata, Atsuya,Iida, Yasuo(2011).Development and optimization of acoustic bubble structures at high frequencies.Ultrasonics Sonochemistry,18,92-98.
8. Mason, Timothy J.(2016).Ultrasonic cleaning: An historical perspective.Ultrasonics Sonochemistry,29,519-523.
9. Wang, Kun,Zhao, Haibo(2015).The Influence of Fiber Geometry and Orientation Angle on Filtration Performance.Aerosol Science and Technology,49(2),75-85.
10. Zhang, Yumei,Zhang, Weidong,Yang, Zhengyu,Liu, Junteng,Yang, Fushen,Li, Ning,Du, Le(2016).Enhancement of fine particle filtration with efficient humidification.Chinese Journal of Chemical Engineering,24,453-459.
11. 王ㄧ帆(2018)。天津工業大學。
12. 王文紅(2018)。基於 PLC 的超聲波自動清洗機設計。機械工程與自動化，2018(1)，198-202。
13. 王文红,杜海立(2019)。自動超聲波工業清洗機的研製。機械與液壓，47(2)，49-53。
14. 史斐娜(2015)。中北大學。
15. 李丙才,傅建青,蔣銘潮(2006)。超聲波清洗機的自動化控制。制造技术与机床，2006(8)，52-53。
16. 李旗,逯力紅,丁鏖舉(2017)。基於超聲波的清洗機設計及清洗效果研究。大學物理實驗，30(5)，31-35。
17. 康永,鄭莉,邵世權(2012)。超聲波清洗技術研究進展。清洗世界，28(4)，12-15。
18. 劉璇(2015)。中北大學。
19. 龐昊斐,祝錫晶,趙軒達(2016)。高速氣流噴射干式清洗理論及實驗研究。製造技術與機床，2016(7)，70-73。