A Comparison between Five Principle Strategies for Adapting Shaking Force Balance During Varying Payload

10.6567/IFToMM.14TH.WC.OS2.043

J. J. de Jong；J. L. Herder

adaptive dynamic balance ； serial mechanisms ； varying payload

Proceedings of the 14th IFToMM World Congress

14th-1（2015 / 10 / 23）

446 - 454

英文

Dynamic balance has been studied to eliminate the shaking forces and vibration at the base induced by rapid motion of robotic devices. This is done by designing the mass distribution such that the total center of mass of the mechanism is stationary for all motions. However, when the payload changes, for example during pick-and-place action, the dynamic balance cannot be maintained, and vibrations will appear, reducing the accuracy. In this paper, five strategies are described to adapt the dynamic balance under varying payload conditions. Three of these strategies rely on reconfiguration of the mechanism; by changing position the counter weights (I), by changing the joint locations (II) or by altering the amount of counter weight (III). The last two strategies use active control of additional linkages to steer the mechanism in over a reactionless trajectory. These additional linkages can be placed at the base as a reaction mechanism (IV), or within the kinematic chain with redundant joints (V). The implications and differences of these strategies are shown by applying them to a 3 degree of freedom (DOF) planar mechanism. All strategies can provide adaptive dynamic force balance, but have different features, especially added complexity (II & III), reconfiguration force (I & III), or energy consumption (IV & V)

1. 劉虹薇(2016)。高分子太陽能電池之形態控制與結構設計對於元件效 率之影響探討。臺灣大學高分子科學與工程學研究所學位論文。2016。1-152。 
2. 林俊佑(2016)。探究以CDIO與認知學徒制教學策略融入3D列印建模課程對學習者空間能力提升及認知序列之影響。臺中科技大學資訊管理系碩士班學位論文。2016。1-55。
3. 黃文鴻(2017)。共價鍵結固定青花菜葉綠素酶1於磁性粒子用以生產葉綠素衍生物。義守大學化學工程學系暨生物技術與化學工程研究所學位論文。2017。1-69。